Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Der USB-zu-TTL-Konverter ist mit dem PL2303-Chip gebaut, er ist für mobile und eingebettete Lösungen mit sehr geringer Verlustleistung konzipiert.
Kabellänge: 1 m.
Schwarzer Pin: GND (Erdspannung).
Roter Pin: VCC (3,3–5 V).
Grüner Pin: TXD (überträgt asynchrone Daten).
Weißer Pin: RXD (empfangen asynchrone Daten).
drumnj
Bewertet in den USA am3. März 2024
Having a "bricked" device I wanted to get the serial output to try repairing it. I made my own USB cable, but it wasn't stable enough.I found this listing, seeing the reviews about it not being authentic I decided to give it a shot, since the price was low. Upon plugging it in on my Windows 10 machine the commonly seen "THIS IS NOT PROLIFIC PL2303." text shows up. However I could still edit the driver settings, so I tried it on my older Windows 10 laptop. This time that name didn't show up in Device Manager. Instead it showed "Unknown USB Device (Device Descriptor Request Failed);" which is what would show up with my homemade cable.This led me to believe it was a driver issue, not hardware. I started looking for older versions of the driver and found a few. Even Prolific had an older driver listed on their website. Sure enough after I "updated" the driver to an older version it showed up properly in Device Manager and allowed me to use PuTTY, removing the "road block" the new driver was causing.You'll see in the pictures I added that it's working with the correct driver name. I even tested it with the "Check PL-2303 chip version" utility that comes with the new driver, showing that it's an XA/HXA chip....the product Prolific states is EoL and not supported anymore.I wish the leads were a little better labeled, and a slightly larger gauge. I had to figure out which color for data went to which pin.For me it was: white = Tx green = RxRed and black are easy, being voltage and ground.Hopefully this review helps others looking as I wanted to share my experience in getting this cable to work.
Claudio Lanfranco
Bewertet in Italien am 18. Januar 2024
Non sono riuscito a farglielo vedere da windows 11 ed alla fine ho dovuto comperare un'altro cavo di altra marca. Peccato, sembrava fatto bene. Non ho avuto voglia di sbattermi a fare N tentativi e reinstallare driver o quant'altro.
David
Bewertet in den USA am10. Dezember 2024
The cable works exactly as expected. The only downside is that the default Windows prolific serial driver that Windows selects by default for this device identifies the device as non genuine, and refuses to load, so using this cable with Windows may require some additional setup. In my case, I used the Zadig utility to install a serial driver that worked. Once I got the driver problem resolved, the device worked flawlessly.
Cleber Baldan Jr.
Bewertet in den USA am19. November 2023
It won’t work if you *just* connect it to a Windows 10 computer.The Device Manager will show a device named “IT’S NOT A GENUINE PROLIFIC PRODUCT - CONTACT YOUR SUPPLIER” and won’t give you a COM port, meaning, useless like this.I was able to make it work, but I had to look for older drivers in the Internet and overwrite the system drivers.
Jake
Bewertet in den USA am15. August 2023
I use this all the time. Never fails to be recognized or connect and use at a bridge device. It does what it says and iv already gotten a couple more. Great for roboticss
Produktempfehlungen