Ihr Warenkorb ist leer
Ihr Warenkorb ist leerArducam F1.6 35 mm C-Mount-Objektiv für Raspberry Pi hochwertige Kamera
Anonymous
Bewertet in den USA am3. September 2024
So this is why descriptions are very important because this says its for the C-Mount RPI HQ Camera and it turns out mine is a newer M12 mount, so it was more than double the size of the mounting ring I was trying to fit it to. I'm sure you could get an adapter, but that would be a lot of strain on the camera mount.
Customer
Bewertet in den USA am22. Mai 2024
this was purchased to mount to a Canon M6mkII using a EF-M to C adaptor. The focal plane was off so the lense was unable to focus on any object more than about 6" away or 3" or less. I used a C mount adaptor as well as a CS mount adaptor, unfortunately neither of them work and I was unable to focus much more than about 8" with the CS mount. I really wanted this to work, perhaps it has another purpose. I have used vintage C mount lenses on this camera with this mount with great success.
Asa B.
Bewertet in den USA am18. April 2022
The 35mm zoom was just a bit too narrow for what I wanted, so I returned the product.
David Eckblad
Bewertet in den USA am18. November 2021
This has a good solid feel to it. Nice construction. Good un-indexed aperture ring. Smooth focus ring. Do note that this provides a VERY slim fov on a c-mount camera. Despite it's shape it acts as a telephoto. I would equate it to roughly 200mm on a full frame camera.This does NOT have IR-Cut, it will fringe red on most C-Mount cameras as they typically don't have an Infrared filter. However, it is possible to adapt a c-mount IR ring filter to this lense as the focusing piece does not extend out the rear.
JLE
Bewertet in den USA am1. April 2021
This lens has a lot of purple flaring in images — quite disappointing. I guess in the future I will stick with Fotodiox adapters and fullframe lenses.
Produktempfehlungen
