Ihr Warenkorb ist leer
Ihr Warenkorb ist leer BETAFPV 4pcs 0802SE 19500KV 1S Brushless Motor Ultralight Weight 1S FPV RC Motor Compatible for 65/75mm 1S Brushless Racing Whoop Drone Quadcopter like Meteor Series FPV Drones-Iceblue
Specification
Item: 0802SE 19500KV Brushless Motor
Weight: 1.88g/pc
Color: Ice Bluev Shaft length: 5mm
Shaft diameter: 1mm
Motor Mount Holes: M1.4
Input Voltage: 1S
Cables: 35mm, 30AWG cables
Dimensions: 10.5*10.5*13.8mm
Bearings: Brass Bushings
Recommended Parts
Propellers: 31mm 3-blade, 31mm 4-blade, 35mm 3-blade, 40mm 2-blade
Frame: Meteor65 frame, Meteor65 Pro frame, Meteor75 frame
FC: BETAFPV F4 1S 5A Brushless FC
Battery: 1S Battery
Package
4 * BETAFPV 0802SE 19500KV Brushless Motors (Ice Blue)
1 * Pack of M1.4*3 Screws
Odaine
Bewertet in den USA am24. Februar 2025
Motors works ok
Kunde
Bewertet in Deutschland am 2. April 2025
Packet kam pünktlich an aber die Verpackung der motoren ist leer. Schrauben liegen drin s haumstof auch aver keine motoren.
cyndi reimer
Bewertet in den USA am28. Oktober 2024
Makes the drone feel much snappier and enables the drone to lift larger batteries for longer flight times.
raphael
Bewertet in Frankreich am 17. Dezember 2024
Titre mensonger ce ne sont pas des version 2022 en tout cas j'ai reçu l'ancienne version celle en noir pas celle en ice blue alors certes ce sont toujours des 08 02 en 19500kv mais ils sont noirs pas bleu et argenté Comme on peut le voir sur la photo à moins que je sois daltonien
Thomas l.
Bewertet in den USA am30. Dezember 2023
Wanted to upgrade my meteor 65 using these motors was just the upgrade I needed smooth steady they seem real nice flies a little bit longer with less throttle.I'm not a racer so just bombing around the house these motors hooked up with the tattu 1s high voltage 300 mah batts,is a winning combo for fun.
Dmitrij
Bewertet in Deutschland am 23. April 2023
Alles funktioniert wie es soll
isaac
Bewertet in den USA am8. April 2023
Before you buy, note that all of the motors rotate in the same direction. To change the direction of a motor, you have to unplug the JST1.25 metal bits (I used a pin to lift the plastic and tweezers to pull) and shift them all. I tried other wire configurations but the one in my picture was the only one that worked.I bought the 19500KV motors for my Mobula7 (+some 40mm/1mm gemfan props, stock props are 40/1.5mm). They are much quieter than stock and fly very well.They come with mounting screws and the connectors feel secure.
Produktempfehlungen
