Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Creality Ender 3 Glasbett, 235 x 235 x 4 mm

Kostenloser Versand ab 25.99€

17.01€

7 .99 7.99€

Auf Lager
  • Keine Ränderkräusel – 2019 Creality 3D-Drucker-Glasbett bietet eine stärkere Haftung, die Formen haften ohne Klebstoff fest auf dem Bett und vermeiden so das Eindringen von Druckkanten.
  • Keine Einkerbungen – Die verbesserte Ender 3 Glasplatte hat ein viel kleineres CREALITY Logo als ältere Version, sodass Logo-Einkerbungen beim 3D-Druck auf der Form vermieden werden.
  • Hervorragende Planlage – Die verbesserte 3D-Drucker-Platte aus gehärtetem Glas bietet eine flachere und glattere Oberfläche als magnetische Matte oder Pei Aufkleber, wodurch eine hohe Planlage für die Unterseite des Modells gewährleistet wird.
  • Super praktisch – sehr einfach abzunehmen, kein Werkzeug erforderlich; dieses Borosilikatglas Bett kann mit mittelgroßen Clips befestigt und bei Raumtemperatur mit Alkohol oder Aceton gereinigt werden.
  • Kompatibilität – Die 3D-Druckerteile sind für Creality 3D-Drucker von Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, bitte bestätigen Sie, ob dieses gehärtete Glasbett mit Ihrem Drucker kompatibel ist.



Pablo Alvarez
Bewertet in den USA am9. Februar 2025
Excellent quality. It makes the base perfectly flat and the filament sticks but it is very easy to remove. Way better than the flimsy magnetic ones (yes, I tried the magnetic ones first...)
Ty
Bewertet in den USA am27. Januar 2025
Works great! Just make sure you clamp it down with some of those black paper clips so it doesn’t move, also putting glue on the bed will help if prints are getting stuck.
Kubewe
Bewertet in Deutschland am 3. August 2024
Ist eben Herstellerqualität von Creality. Passgenauigkeit und Top Oberfläche.
Joan.
Bewertet in Großbritannien am 20. Oktober 2024
Have used this glass bed plate and it was far better to level print head and the print sticks down well when hot enough👍
matt
Bewertet in Kanada am 8. Februar 2022
As some of the comments mention you must clean the bed and this is true. I have had no adhesion problems at all. One the bed has cooled the print pops right off. Thanks creality for another amazing product.
SledgeHammer
Bewertet in den USA am12. März 2020
You will see a lot of reviews stating that the adhesion to the bed is bad, prints not sticking etc. It all comes down to the adhesion of the bed.Now here is my story. This is the best type of glass that you can get for your printers, it can handle the heat and prints come off without any issues. When printing I used to have an issue with the right corner of my prints coming off the bed, this happened ever since I had my printer and I used a mirror for the bed. Every so often I would get a totally flat print, but depending on size J would get a lifted corner in one end.I decided to go with this borosilicate glass plate because it had the right dimension and thickness for my build plate. Again I was experiencing a lifted edge, I even changed my temperate hotter >70 to test, still to no avail. After looking at many reviews I decided to use a skirt, well that solved my issue instantly. I use 6 outlines for the skirt and that is enough, no issues removing the skirts either. I print everything using skirts now.As far as adhesion when printing, you have to use the skirt, plus you have to make sure your first player is close to the bed so your filament comes out of the nozzle onto the bed and not in midair like a waterfall. After you get your perfect print you will begin to wonder why you never used this type of glass for printing. Once the glass cools down a little the prints pop right off without any effort.If you use a mirror you will have to scrape the print off the glass (i know), but borosilicate glass is the best to use as you never have to scrape it ever. Just clean with a little alcohol and a lint free rag and you are good to go.I also have the wham-bam complete system for my 3 printers, but looking at hindsight I never should have bought them because I am not going to replace the glass bed as I like the prints better.I also have my glass bed flipped over so I can get a smooth shiny first layer, if I want the matted look I will just flip it back over to the other side.If you are still having issues with first layer sticking, I saw this really cool video on youtube by CHEP one time and he was referring to a Da Vinci printer, good luck...Hope this helps as this is my experience.
Produktempfehlungen

14.39€

6 .99 6.99€

4.6
Option wählen

24.71€

12 .99 12.99€

4.6
Option wählen