Ihr Warenkorb ist leer
Ihr Warenkorb ist leer PARAMETER
Produktmodell: AHT25
Versorgungsspannung: 2,2-5,5 V DC
Messbereich (Luftfeuchtigkeit): 0~100 % RH
Messbereich (Temperatur): -40~+80°C
Feuchtigkeitsgenauigkeit: ±2 % RH (25 °C)
Temperaturgenauigkeit: ±3°C
Auflösungsvermögen: Temperatur: 0,01 °C Feuchtigkeit: 0,024 % RH
Ausgangssignal: I2C-Signal
Größe: 5,0 x 17,7 x 1,8 mm
Paket enthalten:
2 x AHT25 Temperatur- und Feuchtigkeitssensormodul
Arthur P.
Bewertet in den Niederlanden am 24. Januar 2024
This is a very small sensor with a very small set of connector pins. For normal hobby use you will likely want to solder some wires to the pins to transit to a larger connector (e.g. a grove connector) but due to the size even that could be complicated if you don't have a stable soldering hand. Once connected it's a good sensor but for ease of use you could just as well go for a normal sized sensor as hobbyist.
sibia
Bewertet in Italien am 2. Mai 2024
Lo avevo comprato per leggere la temperatura di un terrario con umidità prossima al 100%.Purtroppo ogni circa due mesi si guastava ed era necessario sostituirlo.Piccolo e preciso ma probabilemente va bene solo per uso indoor al riparo dall'umido.Funziona bene con arduino Nano tramite bus I2C.
Tamara e Marco
Bewertet in Italien am 2. Januar 2024
Funziona bene, lo uso con la libreria Adafruit_AHTX0, ma non è molto pratico perché il passo del connettore non è 2,54 mm come tutti gli altri moduli.
M. Warrillow
Bewertet in Großbritannien am 18. Juni 2024
The pin spacing is much smaller than a standard breadboard pin pitch. The item listing should be updated to state the pin pitch and not just state “AHT25 uses the standard spacing plug connector”Other than having to solder fly leads on to this sensor it works great and is easy to program.
ziomauri
Bewertet in Italien am 16. Oktober 2024
dimensioni minime, contatti non normalizzati non monta in breakboard
Produktempfehlungen
