Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Overview
The ESP32-S3-Touch-LCD-7 is a low-cost, high-performance microcontroller development board. It features 2.4GHz WiFi and BLE 5, integrates large Flash storage and PSRAM, and a 7-inch capacitive touch LCD screen. Support running GUI interface demos such as LVGL. It also has multiple external peripheral interfaces (such as CAN, I2C, RS485, and Sensor) for developing applications such HMI on ESP32-S3. With various functions and interfaces, it is suitable for power requirements in IoT, mobile devices, wearable electronics, and smart home applications.
Features
Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna.
Built-in 512KB Static Random-Access Memory and 384KB ROM, with onboard 8MB Flash and 8MB PSRAM.
Onboard 7-inch capacitive touch screen, 800x480 resolution, 65K colors.
Support capacitive touch control via I2C interface, 5-point touch with interrupt support.
Onboard CAN, RS485, I2C interface, Micro SD card slot and so on, integrates full-speed USB serial port.
Support flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.
Package Content
ESP32-S3-Touch-LCD-7 x1
HY2.0 2P to 2PIN male cable 10cm ×2
HY2.0 2P to 3PIN male cable 10cm ×1
HY2.0 2P to 4PIN male cable 10cm ×2
Development Resources
https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-7