Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

ESP8266 Starter Kit ESP8266 WiFi-Entwicklungsmodul + 0,96 Zoll Display + Temperatur- und Feuchtigkeits Sensormodul + Breadboard + Schaltdraht + USB-Kabel, Elektronik-Kit

Kostenloser Versand ab 25.99€

16.39€

7 .99 7.99€

Auf Lager

Info zu diesem Artikel

  • ESP8266 ESP-12E EntwicklungsboardESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Modul. Eingebauter Micro-USB, mit Flash- und Reset-Schaltern, einfach zu programmieren, für Arduino kompatibel, funktioniert hervorragend mit der neuesten Arduino IDE/Mongoose IoT/Micropython.
  • 0,96-Zoll-OLED-LCD-Display Auflösung: 128 x 64, Betrachtungswinkel: > 160 °, Stützspannung: 3,3 V bis 5 V DC, Stromverbrauch: 0,04 W im Normalbetrieb, Vollbildbeleuchtung 0,08 W, Kommunikation: I2C/IIC Schnittstelle, eingebetteter Treiber-IC: .
  • Feature Dieses Kit hat komplette Werkzeuge, kleine Größe, einfach zu transportieren und zu lagern, einfach zu bedienen, gute Leistung, mit Jumper und USB-Kabel, Sie können es selbst bedienen, sehr gut geeignet für Heimwerker.
  • Experimentelles Projekt Mit ESP8266 und Wireless IoT Development können Sie 4 Heimprojekte haben, darunter Wetterstation, Flugzeugbeobachter, Weltzeituhr und Klimaknoten. Sie können auf diesen Link verweisen, um zu experimentieren: https://bit.ly/3PvwtMh
  • Paket beinhaltet Sie erhalten 1 x ESP8266 ESP-12E Entwicklungsboard, 1 x 0,96 Zoll OLED-Display, 1 x Temperatur- und Feuchtigkeitssensor, 1 x Überbrückungskabel, 1 x Mirco-USB-Kabel, 1 x Steckbrett.


Specification:
CP2102 ESP8266 ESP-12E Development Board:
802.11 b/g/n protocol
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLL, regulators, and power management units
+19.5dBm output power in 802.11b mode
Integrated temperature sensor
Supports antenna diversity
Power down leakage current of less than 10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 2.0, SPI, UART
STBC, 1x1 MIMO, 2x1 MIMO
A-MPDU & A-MSDU aggregation & 0.4 s guard interval
Wake up and transmit packets in less than 2ms
Standby power consumption of less than 1.0mW (DTIM3)
0.96 OLED display:
Resolution: 128X64
Number of pins: 4pin
Supported platforms: for Arduino, ESP series, 51 series, MSP430 series, STIM32 / 2, SCR chips
Power consumption: normal display power consumption is 21mA-28MAX
Working current: The current is about 20ma during normal operation, and the current is at the ua level during sleep.
Viewing angle: full viewing angle
Working temperature: -20°C~70C
Storage temperature: -30°~80°C
Working voltage: 5V/3.3V
Size: 0.96in
Driver IC:
Communication: IIC
VCC: 3.3~5V
GND: Ground
SCL: Serial Clock
SDA: Serial Data
Temperature and Humidity Sensor:
Accuracy: +/-5% RH,
Temperature measurement range: 0~50°C,
Temperature measurement accuracy: +/-2°C
Digital signal output
VCC: 3.3V~5V
GND: Ground
DATA: MCU IO port
Tips: Do not reverse the VCC and GND, otherwise it will burn!
Package includes:
1 x ESP8266 ESP-12E Development Board
1 x 0.96in OLED display
1 x Temperature and Humidity Sensor
1 x Jumper Wire
1 x Mirco USB cable
1 x Breadboard


L.R.
Bewertet in den Niederlanden am 28. Juli 2024
It looks like a nice starter kit but it isn't. The'nodemcu' ESP8266 seams to be broken. There is a connection with the PC and the CP2102 but no communication with the ESP8266 itself. LCD screen has cracks (by shipping?). Only functional are the included breadboard and kabels.
David
Bewertet in Großbritannien am 18. November 2024
 
Tapken Uwe
Bewertet in Deutschland am 11. Februar 2024
Schönes Set als Starterprodukt für junge ProgrammiererInnen
Customer
Bewertet in Großbritannien am 5. Dezember 2023
Development board did not work, had to buy a different one. :(
Duncan
Bewertet in Großbritannien am 11. August 2023
OLED screen cracked on arrival.Which disappointingly renders the project uselessThe board still works.If the screen had not been cracked it would have been 5+ stars and I would have bought a bunch more.
Produktempfehlungen

19.75€

9 .99 9.99€

4.7
Option wählen