SunHeater S120U Universal Solar-Poolheizung, 6,1 x 7,6 m, Schwarz

Parfait pour une petite piscine de 15 pi.

Not made a great difference bit disappointed

Produkt wie beschrieben,Installation einfach,für einen 12m3-Pool ausreichend.

Realmente no se logra calentar nada el agua

Over all its a great panel. I have a 18' x 48" intex pool. I use the Intex solar cover. I hung the solar on the side of my house vertically which isn't the best position but for my yard I did not have tons of options. It faces due south but has some shade in the morning and late afternoon. When I filled it the temp was 59 degrees. I set up a secondary intex pump that pumps about 600 gph through the solar. I added on thermometers at the input and output of the solar array as well. I have the pump set up on a cheap wifi plug so I can start the secondary pump from my phone. Using the second pump for the solar means I don't need to use diverter valves or have the solar pumping when no sun. It also means I can turn on and off remotely from my phone. I feel getting a wifi plug and second pump to use with this solar heater is the best setup. I normally run it for 5 min in questionable sun and check the thermometers to see if there is a temp gain.When I first set it up i had some problems with it leaking. it comes with pvc adapters that will fit intex hoses. From reading, pipe tape is not the best way to secure a threaded pvc fitting, but it is what they include. With a single wrap of tape the fitting did leak badly. The second time I tried with 3 layers of tape over all the treads and did not over tighten like the first time. All the leaks stopped. So, use a lot of tape and don't over tighten.As I mentioned it does fit intex 1.25 inch hose but does not have the gasket needed. I took the gasket off an intex T and used a screw driver to push it into the grove in the intex hose. Once the gaskets were in and the included hose clamp was used there were no leaks.With the wifi plug I bought for the second pump that feeds the solar, I tuned on the pump when ever the sun was on it. I could confirm it was working by looking at the thermometers on the input and output of the solar. If there was at least a 1 degree difference I would run the pump. If not, I'd turn it off. In full mid day sun there was a 4-5 degree difference. When used with a intex solar cover, my pool went from 59-77 in 4 days. I would loose about 1 degree every night which would be more without cover.So in summery, it definitely helps expedite heating of your pool. To keep the heat you have I recommend a solar cover as well. I recommend 3 layers of pipe tape to prevent leaks and no over tightening. I also recommend a separate pump and wifi plug so you can turn it on and off easily without changing you main pump schedule or having to turn diverter valves (not included) It is compatible with intex 1.25 inch plumbing but will need a gasket.Update: my pool is now 83 degrees and has been open for 1 week!

Excelente producto, fácil de instalar e incremento como 5 grados la temperatura de mi alberca de 12000 litros. Tendré que comprar otro para buscar 10 grados. 🤪