Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Beschreibung:
Dieser Pt100 Temperatursensor verwendet einen feinen Filmwiderstand, hat eine stabile Leistung und hohe Präzision.
Spezifikationen:
Typ: RTD PT100 Klasse A Membran.
Länge der Sonde: 50 mm.
Durchmesser: 6 mm.
Gewindegröße: 1,2 cm NPT (amerikanisches konisches Gewinde für Rohre).
Nennaußendurchmesser: 2,1 cm.
Material der Sonde: Edelstahl.
Kabel: Mit beschichtetem Kupferkern.Kabellänge: 2 m.
Gewicht: ca. 100 g.
Im Lieferumfang enthalten:
1 x Temperatursensor:
Hinweis: Der 1,27 cm NPT zeigt den Standard für US-Rohrgewinde an. Bitte überprüfen Sie zuerst und stellen Sie sicher, dass dies die Größe ist, die Sie benötigen.
DV
Bewertet in den USA am7. November 2024
Advertised as a 3-wire probe but came with a 4-pin connector.
jeff b.
Bewertet in den USA am4. Mai 2020
This is a 4 pin connector , I needed a three pin, and was led to believe this is a 3 pin arrangementWaited weeks for the wrong part.Quite disappointedUpon inspection of the part, there is a missing fastener and the part looks like it was not finished at the assembly line.This needs to go back . Don’t recommend purchase from this vendor
Leonard
Bewertet in den USA am5. Oktober 2018
Use these as part of a Brewing Mash Temperature controller. Temperature jumps up and down 1-2 Degrees F, so not so great for an OCD perfectionist that wants to hold temperature exactly as programmed. Works but indicated temperature takes a long time to stabilize.
Sabrina Valentine
Bewertet in den USA am26. Juni 2018
After isolating from everything I could imagine would interfere, I still get some "jumpy" temp readings. Tried a friends better brand name and they worked. These will work in a pinch but looking to upgrade soon.
Brandon Schrage
Bewertet in den USA am21. März 2018
Couldn't beat the price so I thought I'd try it. It arrived on the slow boat from China about a month after I purchased it. I wasn't in a hurry so no big deal. Packaging was good. Was only 1 degree off. Only issue i can see is the threads are not tapered enough, threads all the way into fitting. Requires lots of tape and thread sealant for it to not leak.
Produktempfehlungen
