This desk is perfect for our gaming computers. It easily fits two large monitors and could fit a third if we wanted. The installation was simple and I haven’t noticed any problems with it being easily scratched or broken. It’s pretty durable.

Günstig aber dennoch robust. Lässt sich super aufbauen auch allein.

Es un escritorio imponente, lo tengo en mi oficina y me lo han elogiado varios clientes, el paquete llego un poco dañado por el servicio de mensajería y faltaban unas piezas, pero el proveedor me las envio, muy buena atención, le dieron un seguimiento impecable, se preocupan mucho por las necesidades del cliente.

I like the quality

The desk is sturdy and made of good materials. So overall nice desk. However, it was very difficult to assemble. The instructions were not clear, out of order, and sometimes showed different parts. The bags with hardware were poorly labeled and some of the pre-drilled holes were stripped and would not take the screw. Solid desk, but was way too difficult to assemble.

This is a reasonably priced desk that meets my needs, although it may not be as durable as I would prefer. I will need to take extra care to prevent scratches and maintain its appearance.

This is for the Tribesigns 70.8”Executive DeskThis one which fit my criteria was as followsPrice range below $200.00 ($177 at time of purchase) ✅Depth greater than typical 21-24 most desks offer (roughly 30" for this model) ✅Length for both 32" monitors, PC itself and possibly a printer depending on configuration(70.8" for this model) ✅No unnecessary cross/x bars or cumbersome shelves/gimmicky storage or placement "solutions" ✅Thoughts/Fears BEFORE purchasing:Cheap material for the desktop, fragile frame/warped, screw holes not aligned properly/machined in wrong areas, etc the usual.What I ACTUALLY RECEIVED:3 very sturdy, very durable and quality feeling pieces of wood for the desktop that fit flush together.A nicely cut, durable, easy to assemble, metal frame with SEVERAL mounting points for securing together.Easy to follow instructions, several extra screws and bolts with the included tools (L wrench's) for assembly.Pros : Durable/Sturdy (It feels very good, I weigh about 200lbs myself and sat on it to test, felt no strain.30" of depth. ( I can not stress enough how much that is compared to typical desks offering 21-25" at most, it feels GREAT.)No unnecessary shelves, storage solutions/placement options. (a lot of those gimmicky things that mark up the price and over-complicate the build)No cross or x bars that get in the way (Frame is supported by 3 pieces on both sides joined in an H configuration)Cons: No grommets, and the frame runs very close to the edge. As illustrated in picture 2, 3 and 4. I have a monitor mount that originally went through a grommet on my previous desk, this one didn't have any so I had to use the clamp option. The desks frame runs too close to the edge to and because of that the clamp cant grab the inner or outer edge at any point, (this will be the case for most clamps) Fortunately, I don't place my mount on the center and my preferred spot happened to be right where one of the support bars is installed. In the 3rd and 4th picture the clamp is secured onto the "T" section of the frame with parts of it not pushing up against anything. This works for me because of placement and it feels just as secure as when I used a grommet in my last desk. If you want to put it in the middle, I was able to make it work just by using the styrofoam block and some cut and taped pieces of cardboard from the packaging and use it to fill the "gap" to secure the clamp just to see if it would work if I wanted to place it in the middle and it held up to a very good amount of stress. If I wanted to put my monitors in the middle I would trust that solution but a wooden block or other piece of material might be better if you have it.TLDR:Great desk, great size, great price, great materials.No grommets, frame runs close to the edge might make securing mounts tricky. Overall recommend this purchase. Can see it being used as a work station, gaming station, 3d printing station, hobby table.