Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Adafruit DS2413 1-Wire Controller Breakout mit 2 GPIO

Kostenloser Versand ab 25.99€

7.05€

2 .99 2.99€

Auf Lager

Info zu diesem Artikel

  • You can put as many of the DS2413's as you want on a single I/O line, each one is uniquely addressable and shares the single I/O pin happily.
  • The two controllable I/O lines (PIOA and PIOB) can be used as inputs or outputs. They are open-drain, so if you want to power an LED or something, you'll need a remote power supply.
  • We have a basic Arduino sketch that uses the OneWire library to communicate with this chip. Don't forget to add the 4.7Kohm resistor from I/O to your 1-Wire controller power supply (3.3V - 5V) on the Arduino side of the wires.
  • Dimensions: 15.78mm x 9.96mm x 2.94mm


Details
You're too cool for I2C, and SPI has so many wires, 8-bit parallel... how can that be fashionable!? You are a 1-Wire kinda gal, and you want more 1-Wire breakouts in your life to complement all of your great engineering. Well rock on, because here you go, it's a 1-Wire controller with two open-drain GPIO.; You can put as many of the DS2413's as you want on a single I/O line, each one is uniquely addressable and shares the single I/O pin happily. The two controllable I/O lines (PIOA and PIOB) can be used as inputs or outputs. They are open-drain, so if you want to power an LED or something, you'll need a remote power supply (see Maxim's product page for more details); We have a basic Arduino sketch that uses the OneWire library to communicate with this chip. Don't forget to add the 4.7Kohm resistor from I/O to your
1-Wire controller power supply (3.3V - 5V) on the Arduino side of the wires.

Dimensions:

  • 15.78mm / 0.62" x 9.96mm / 0.39" x 2.94mm / 0.11"

Produktempfehlungen

53.54€

26 .99 26.99€

4.4
Option wählen

16.42€

8 .99 8.99€

4.6
Option wählen