Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Adafruit Audio FX Sound Board + 2x2W Verstärker, WAV/OGG Trigger, 16MB, 2217

Kostenloser Versand ab 25.99€

53.54€

26 .99 26.99€

Auf Lager

Info zu diesem Artikel

  • EINFACHE HANDHABUNG - Mit dem Adafruit Sound Board benötigst du keinen Arduino oder andere Mikrocontroller. Es ist komplett eigenständig und einfach zu bedienen.
  • KOMPAKT UND PORTABEL - Mit nur 51mm x 23mm passt das Sound Board problemlos in deine Projekte, egal ob du Props, Kostüme oder Spielzeuge kreierst.
  • INTEGRIERTER SPEICHER - Das Board verfügt über 16MB integrierten Speicher, genug für eine Vielzahl von komprimierten oder unkomprimierten Audiodateien ohne zusätzliche SD-Karte.
  • VIELSEITIGE TRIGGEREFFEKTE - Dank von 11 Triggern kannst du bis zu 11 Tasten oder Schalter anschließen und verschiedene Audiofiles auf unterschiedliche Weise abspielen.
  • KRAFTVOLLER SOUND - Der integrierte 2x2W Class D Verstärker sorgt für lauten, klaren Sound und kann direkt mit Lautsprechern verbunden werden. Perfekt für beeindruckende Audioeffekte!


Du willst Soundeffekte in dein nächstes Projekt einbauen, hast aber keine Lust auf komplizierte Mikrocontroller? Dann ist das Adafruit Sound Board genau das Richtige für dich! Highlights:

  • Kein Arduino nötig: Funktioniert komplett eigenständig mit 3 bis 5,5V.
  • Kompakt: Nur 51mm x 23mm.
  • Eingebauter Speicher: 16MB, keine SD-Karte nötig.
  • USB-Massenspeicher: Einfach per USB-Kabel Dateien rüberziehen.
  • Verschiedene Audioformate: Unterstützt Ogg Vorbis (komprimiert) und WAV (unkomprimiert).
  • Hohe Soundqualität: Bis zu 44,1KHz, 16-Bit Stereo.
  • 11 Trigger: Für 11 Buttons oder Schalter.
  • Stereo-Line-Out: Kopfhöreranschluss möglich.
  • 2 x 2W Verstärker: Direkter Anschluss an Lautsprecher.
  • Verschiedene Trigger-Effekte: Fünf verschiedene Modi für jeden Trigger, einfach durch Umbenennen der Dateien.
Ob du Props, Kostüme oder Spielzeug baust, das Sound Board ist super einfach einzurichten. Wähle zwischen unterschiedlichen Trigger-Typen: Basic Trigger, Hold Looping, Latching Loop, Play Next und Play Random. Jede Datei wird einfach durch Grounding eines Pins ausgelöst. Das Board ist ideal für kleine, tragbare Projekte und kann mit AAA-Batterien oder einer LiPoly-Batterie betrieben werden. Power und Sound, ohne komplizierte Programmierung! Hinweis: Terminalblöcke könnten blau oder schwarz sein.

RewindByDesign
Bewertet in den USA am4. August 2024
Didn’t work. Both green and red lights on when plugged into computer, which didn’t recognize the device. Tried multiple computers, cables, etc. Apparently this is a common issue with this 16MB version of this board, as I found out after the fact from internet searching trying to trouble shoot the problem. Anyways, I won’t be trying to use this product again.
burnem79
Bewertet in den USA am5. Dezember 2023
This is so simple to use, you load audio into it like you would on a USB stick. Connect the minimum number of pins needed to operate and it works! I have this working with a reed switch that passes random magnets. I have the reed switch connected to ground which is connected to pin 1. Works great.
cody
Bewertet in Kanada am 28. Oktober 2022
Within seconds of adding 5v power the amp chip got so hot I burnt my hand
WC BOYT..
Bewertet in Kanada am 12. Februar 2020
When it comes to sound modules and the ease of loading effects and hook up makes Adafruit the go too module for most applications
Sean G
Bewertet in den USA am13. Mai 2019
I used this to add sound and lighting effects to a Star Trek phaser rifle (Type III from First Contact). I'm a prop builder and a novice when it comes to circuitry. I opted to give this product a try for a quick and easy install rather than trying to customize an Arduino micro-controller. Boy am I glad I did! This board has an integrated amp and is pre-programmed with various switching and audio playback capabilities. My specific application was simply a phaser sound when the trigger was pulled. I also wanted a synchronized muzzle flash which this board was also able to accommodate!Installation:BATTERY: I highly recommend a rechargeable lithium Ion battery pack, sizing dependent on your application and space requirements. Adafruit products have you covered here as well. You can also go with a AA or AAA battery holder, three-pack is ideal to provide 3.5v to the board. The battery is wired into the VIN and GRND pinouts.SPEAKER: A stereo audio pinout adapter is included and makes connecting a speaker super easy. Solder the adapter and screw the speaker leads in.SWITCH: The board comes with a series of audio switch pinouts. Wire a momentary switch to one of these pinouts and ground. The pinout number used will correspond to the audio file naming so be sure to make note of which pinouts you're using and what sound you want each of the switches to trigger.AUDIO FILES: This is where this audio fx board really shines. There is NO CODING involved here. The functionality is pre-programmed into the board. You can find a tutorial for the audio playback on Adafruit's site. In short, you'll name the file (.wav or .ogg) and load it to the board (USB from board to PC). That's it!SYNCHRONIZED LIGHTING: For my application, I wanted a muzzle flash to light up when the audio file was played. There is an ACT pin, or 'Activity pin' that allows just that. It grounds your component when the board is active, i.e. playing a sound. I soldered an LED to the ACT pin as the ground and then to my main parallel circuit + and viola! Muzzle flash!I love these little boards and plan to use these as my go to for costumes and props going forward. I've dabbled in Arduino and have no desire, at least not currently, to delve deeper into that world. If you need sound for a project, and possibly lighting, give this board a shot! For a few bucks more than Adafruit's site, I love the ability to grab one of these quickly with Prime Shipping. I'm impatient and there's nothing I hate more than a delayed project waiting for parts.
Produktempfehlungen

57.17€

30 .99 30.99€

4.4
Option wählen

32.99€

15 .99 15.99€

5.0
Option wählen