Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Kupfer Rohrkabelschuh Set, 12 Stück Kabelschuhe 16mm2, Ringösen Kabelschuhe SC16-8, Kabelschuhe Set for Battery, Electrical and Automotive Wiring
Einbau Schritt 1
1.Die Kabelschuhe in das Kabel einführen.
Einbau Schritt 2
2.Verwenden Sie dann die Quetschzange, um die Rohrkabelschuhe mit dem Kabel zu verbinden.
Einbau Schritt 3
3.Die Installation ist abgeschlossen.
Elektrische Reparaturen
Boot
Auto
Automobil
Customer
Bewertet in Großbritannien am 9. Februar 2025
These are nicely finished tinned cable lugs which will be ideal for marine use. The tinning prevents corrosion and although it suggests a cable could be soldered to them this is not recommended for use in boats (my intended use) because of the vibration and movement. Instead, crimping, followed by a heat shrink sleeve, is best practice. At a little over 50p each these are good value.
Baz
Bewertet in Großbritannien am 6. Februar 2025
Nice little bag of uninsulated terminal tags for crimping to 16 guage wires, useful for wiring in things like solar panels for battery back up systems and additional small auxiliary batteries for camper conversions etc.They crimp reasonably well if you use a good crimping tool and produce a fairly sturdy connection so should last a long while, worth a try at a reasonable price.
Sam Robert
Bewertet in Großbritannien am 24. Februar 2025
This battery terminals are very easy to install, you could clamp it or just simply solders it to wire for better electrical connections. The price however is a bit expensive for just 12 connector terminals. It does what it describes and it fit well to the right gauge of wire.
Customer
Bewertet in Großbritannien am 23. Februar 2025
These are single sided in a set of twelve battery terminals so they don't comprise a kit of parts as such. For most DIYers. you'll probably only buy these when necessary for a particular job so having a range of sizes would be uneconomical as you'd be less likely to need a range of them.Stainless steel, but not high polished. They are unlikely to tarnish and have been well made with no burrs etc.
Clanduncan
Bewertet in Großbritannien am 18. Februar 2025
These are substantial wire terminals, and would have been ideal for my home solar project to connect batteries and inverters. The bolt size for connecting was perfect, and the wire barrel accepts quite a thick wire. The problem I had, not having a purpose made tool for crimping them, was in achieving a sufficiently strong crimp. Even a pair of mole-grip pliers wasn't strong enough to achieve a strong crimp. The risk then, is that even with a good electrical connection the cable connection will be susceptible to movement and stress. My opinion is that these terminals are good, and useful, but you will need a proper crimping tool for them, and some form of stress relief on the connection too.
Produktempfehlungen
26.85€
13 .99 € 13.99€
40.23€
18 .99 € 18.99€