Un bel bestione ma robusto e super comodo per ogni operazione di montaggio, pulizia etc.Dai pannelli fonoassorbenti mi aspettavo di più.

Wenn man an der Front die AIO Wasserkühlung einbauen will muss man die Schlauchanschlüsse nach oben setzen, was totaler Unsinn ist. Unten kann man sie wegen der Streben des 2. Bodens nicht vom Kühlkörper zur Grafikkarte legen. Es ist kein Platz..

Great case with nice IO, enough room to build any build you want and the choice to go for a silent or a cooling orientated setup at an mediocre price.The only negative thing is the case fans, they can get quite loud on higher rpm, though switching them out with newer be quiet fans took care of that.

Everything ok, on time! 👍🏻

L'espace généreux pour le refroidissement à air et eau est très apprécié. Il est intégré une filtration de la poussière.La porte est vraiment plaisante à mettre et à enlever de par son design. Les matériaux sont de qualités.Il y a un contrôleur de ventilation à l'arrière pour régler les ventilateurs situés sur les radiateurs avant ou supérieurs.La gestion des câbles est facilitée par l'espace disponible, excepté le bas de la carte mère et le carénage du bloc d'alimentation où l'insertion des câbles peut être un peu délicate. En retirant le carénage du bloc d'alimentation, on obtient plus d'espace, en plus d'une meilleure circulation d'air.Cependant, j'ai quelques réserves. Une seule cage flottante pour disque dur m'a été fournie, bien que ce boîtier en prenne en charge plusieurs. Les vis moletées fournies pour fixer les supports PCI et les plateaux SSD sont assez dures. Je finis toujours par utiliser un tournevis.Bien que son prix puisse sembler élevé, c'est un excellent investissement pour ceux qui cherchent un boîtier sobre, élégant et silencieux.

Wirkt und ist sehr hochwertig. Aufbau und Anordnung von Führungen und Befestigungen ist sinnvoll. Airflow 8/10. Einziges Manko, die magnetischen Abdeckungen ( Staubfilter) sind sehr empfindlich, darin bleibt auch bei sachgemäßen Umgang manch eine Delle zurück.

Nach 2 Fehlkäufen habe ich Endlich den Richtigen Tower gefunden. Alles hat gepasst, auch meine Wasserkühlung. Bin sehr zufrieden mit der Qualität.

Klasse Gehäuse mit viel Platz und sehr gutem Airflow mit dem Meshfront- und Deckel Umbauset (inkl).War anfangs etwas skeptisch wegen derm versetzten Luftaustritt oben aber mit meiner 360er AIO im Pushbetrieb geht mehr als genügend warme Luft heraus.Alles sehr kühl und leise ohne Vibrationen oder sonstige Störgeräusche.Sehr hochwertig gebaut, optisch schlicht ohne RGB.Durchdachter Multi-bze Seitenumbau möglich.Separate Lüftersteuerung (Platine mit Anschlüssen) samt 3 Stufen Schalter.Seitenverkleidungen mit Schnellverschluss, ausfahrbarer AIO-/Lüfterhalterung oben was sich beim Einbau als sehr praktisch erwiesen hat. Preisleistung ist ok.Für aktuelle Mid- bis High-End Hardware völlig ausreichend.Klare Kaufempfehlung

Works well, good purchase

Das beste Gehäuse was ich bis jetzt hatte!Ein bisschen "groß" dafür aber super Platz. Leichter einbau und gute ideen z. B. mit dem schlitten für radiatoren. Zuerst dachte ich, weil die Lüfter zur mitte versetzt sind das der luftstrom oben stockt. Tut er aber komischerweise nicht. Wenn man die hand drauflegt spürt man einen sehr guten luftzug, und das bei 500 umdrehungen. Ich hatte 2 fratcal design Gehäuse. Aber dieses hier ist wesentlich besser. Vor allem ist für jeden was dabei. Für beleuchtung einfach seitenwand mit fenster nachkaufen. Sollte es geben. Für silent liebhaber wie mich perfekt. Ich höre nur kurz beim start was, dann absolute ruhe. Der größte krach bei meinem PC kommt von der maus wenn man klickt. Selbst unter last ein witz. Meine 6800xt höre ich kaum und meine CPU bleibt 10 grad kühler. Der rechner steht auf dem schreibtisch genau neben mir.Kurz gesagt, egal was man will, Licht, Silent oder airflow, das Gehäuse erfüllt alle Wünsche.Nur das metall auf dem das mainboard montiert wird ist sehr weich... Da hätte ich mir mehr steifigkeit gewünscht und der lack ist be-quiet-typisch sehr anfällig für kratzer.

I bought the black version without glassLet's resume my tought with a few bullet points firstGood- Packaging is alright, enough to protect the product from transport- A mix of metal & synthetic that does not feel cheap- Well designed all the parts goes well into place, one of the best I have seen on that subject- The three included fans are Quiet enough if the PWM control is set to 1 (I am used to Noctua)- The side pannels opening & closing is very comfortable when you come from thumbscrew- Front ports are just what is needed for most and easy to connectLess good- The provided manual is limited and, words are limited to titles- No screws to mount the motherboard or the drives included in the package but described in the manual, fortunately I have a lot from previous cases- Can only mount three 3.5" drives by default if you want more you have to buy more traysNo bad points on that case for me, I think it's a good case overall for the price paid, I would have been more happy without the less good points and I wish the front ports & switches would have a cover door but It's a nice to have, and if I had other choice of colors than black or white

This case is amazing to build in, everything has been well thought out and the quality of materials is impeccable. Highly recommend this case the team that designed this case obviously put a lot of care and attention into all aspects

I love this big monolith looking void on my desk, much more space than previous midtowers I've had.I really appreciate the solid steel+foam side panel as I hate tempered glass. I have spent enough of my life cleaning up spontaneous tempered glass explosions; I don't need glass in my bedroom carpet. I might have bought the 500DX or several other cases instead except they don't come with steel siding (even as an option), in fact its alarming how few high quality cases seem to offer steel or even acrylic sides.They give you TWO front panels, one with solid with foam for noise reduction and one that is mesh for better airflow. I actually use both, mesh in summer when I have more noise from fans in the room anyway, but in cooler months the solid panel still allows enough air through the side channels that 3x140mm pressure fans can still cool my system, while the foam cuts down on the chipset noise a bit.I didn't think I would use it, but the fan controller at the back does make controlling tripple fans on the front or top radiators much easier, and I have actually used the fan settings on the front IO of the case to force feed more airflow for heavy workloads.I really like the door design, which I've used a lot since I'm swapping GFX, SSD and my cooler too much with this build I messed up a bit (and this expensive GFX market). Its so nice coming from old case screw '00 cases to a much more modern approach. The one downside compared to a hinge door is that the whole door/panel comes off at once and so you need to find a place to put it while working, but it also comes out almost completely vertically, so you don't need to give the panel room to swing. Putting the door back isn;t that tricky: you just need to use one hand to align the bottom first (or the door bottom will miss and it will slide down), and make sure its aligned with the front first (or the door might not latch closed), but for me it still beats thumb screws in glass and sliding metal doors with 4 tabs.I like having the generous water cooling space (waiting for a deal on a 360 or 420, can underclock for now) and all the dust filtration is highly appreciated because of my skin condition creating too much dust (and they are catching a lot, but I don't mind cleaning them out monthly if it helps keep it out of my cpu/gpu coolers)I love having space for cable management, the only place it's annoying is trying to snake cables in the thin gap between the bottom of the motherboard and the PSU shroud, but there is more space if you remove the PSU shroud (which improves airflow if you remove anyway)Minor complaints:They only gave me one floating HDD cage (the case supports multiple), and the lower double cage I'm hesitant to use in case the HDD doesn't get enough cooling down there. I wish I could buy a second but they seem kinda expensive as a German company, having trouble finding a reseller. However, I'm kinda out of SATA slots on my motherboard anyway.. so I would probably put the second HDD in an exterior USB enclosure because they run slow enough to not max out a USB connection.The thumbscrews they give for securing PCI brackets and SSD trays are really sticky/stiff, I can't use them as "thumbscrews" I always end up reaching for a screwdriver because my fingers alone aren't enough. I think it's the paint they put on the screw threads to make them black and match the case, but if you aren't like me opening the case twice a week this is a tiny concern. Edit: I can just BUY replacement thumbscrews! Why did I never think of that...It's a bit annoying getting the screws on the SSD trays to realign when you take them off to install 2.5" SSDs. The long tray that holds 2 drives is long enough the screw at the end has trouble finding its hole without getting cross threaded, if there was an alignment pin that would probably help, or making it tool-less somehow (it's just a 2.5 inch mounting tray after all)The plastic feet they give you are kinda stiff going in their divot/holes, was worried I would scuff the paint or the plastic trying to get them to fit, but that's a one time thing, very minor. On the other hand, the feet widen the stance of the case making it wider, its the most stable case I've had, no concern at all it would tip, and the rubber on the feet provide lots of grip so its not sliding at all.