Ihr Warenkorb ist leer
Ihr Warenkorb ist leerElektrischer bürstenloser
Kunde
Bewertet in Deutschland am 6. März 2024
preis/leistung sehr gut.sehr gute verarbeitung.
Ing:Ibrahim Atef
Bewertet in Deutschland am 12. September 2024
ich bin jetzt zufrieden
Michael LoBue
Bewertet in den USA am21. Juni 2023
Die Medien konnten nicht geladen werden.
Roswitha
Bewertet in Deutschland am 14. November 2023
Schnelle Lieferung, Preisleistungsverhältnis Ok.
Seku
Bewertet in den USA am1. September 2023
Kit arrived as advertised. I was able to reuse a lot of the hardware that came with my e-scooter.Installation was straightforward, although I did have to make slight modifications to the speed controller housing for chassis fitment. Turns out there's a good bit of empty space surrounding the PCB.I reapplied fresh thermal compound to the mosfets upon reassembly (Antec NanoDiamond thermal compound). So far it's been decently cool to the touch, even after hard runs.I then gave it XT60 connections for a Li-ion battery, ran an inline 35A fuse, and omitted the distribution block in favor of all-weather bullet connectors: so far it's held up perfectly even after getting caught in the rain during a ride.The motor has been a real gem; it accelerates smoothly and it's a lot quieter than I was expecting. Has no problem keeping up with city traffic, although I don't like pushing the full speed all the time, but having the option to get out of the way quickly adds a lot of confidence to the ride.Overall would recommend: it's a solid performing motor and the speed controller is well constructed (no cold-solder joints, good wiring, good board-level components, etc.). Perfect complement to any Lithium Ion conversion project.
Tavera
Bewertet in Mexiko am 3. Dezember 2022
El motor funciona perfecto, salvo que al momento de recibirlo presentaba pequeñas marcas como reapaduras.El único defecto es el tamaño del controlador, ya qué esta muy grande.
Nick
Bewertet in den USA am19. September 2022
UPDATED: I was wiring up a headlight on this controller, and the wiring diagram does not show voltage on the output for the lamps. I grabbed my multimeter and tried checking, but the connectors ARC'ED and burnt my finger tips horribly (the photo is from after I washed the black char off). I have no feeling in 2 of my fingertips now and a nice blue dot in my vision from the arc flash. Turns out the output for the voltage is full, unregulated, 48 volts with high amps from the battery. Extremely dangerous not to tell people this. Not only did my fingers get charred, my brake light blew up and now I need a new one. Buyer bewareI finally finished the mini atv that this was going on. i weigh 150lb, i estimate that the atv weighs about 70 lb or so, and the thing cant even make it up any tiny incline. It does great on flat ground with a top speed of around 25mph. i hijacked the motor signal wire into a potentiometer to limit the max speed and make it kid-friendly with the ability for adults to have fun on it tooIt works well in clockwise rotation. I tried every combination (including the directions included with the motor that made it so the motor did not rotate at all) of the phase wires to get counterclockwise to work right but couldnt get it. I was able to get it to spin in reverese, but not at max speed and the rotation was not smooth. On top of that I could not get the 3 speed switch or reverse switch to function while motor was rotating counterclockwise. I then went on to re-pin the hall effect sensor harness to match my phase wires and that reverted the motor back to clockwise rotation. Long story short, mount the motor so that it is going to be rotating clockwise and save yourself a couple days of messing with wires. 2 cuts with an angle grinder and some welding was way faster than trying to figure out how to make it function in reverse.
Luc L.
Bewertet in Kanada am 18. August 2022
Premieree raison : je voulais utiliser ce moteur pour autre chose qu'un scooter m'as le shift est trop court.Ddeuxième raison: pourquoi la compagnie n'envoie pas de shema de connection du convertiseuret de la poignée etc.
Produktempfehlungen
29.00€
13 .99 € 13.99€