Ihr Warenkorb ist leer
Ihr Warenkorb ist leerSCHNELLER AUFBAU - Richten Sie Ihren Klapptisch in wenigen Sekunden auf! Diese tragbare Werkbank wird mit einem Tragegurt geliefert, so dass diese mobile Werkbank überall hin mitgenommen und einfach aufgebaut werden kann.
Lynda Hathaway
Bewertet in den USA am3. Dezember 2024
Just expensive, otherwise it does all the things it states. The legs are very strong as long as you apply force in the intended direction. You need a perfectly flat floor for it to seat properly.
BlackK12R
Bewertet in den USA am20. Juli 2024
Easy to set up and put away. Sturdy and strong. I replaced my DIY big bench with this guy for more room in the garage.
Chad Duncan
Bewertet in den USA am8. April 2024
It's a table top when you need one. A little flimsy for the money. Came with some of the cross arms bent.
Handlebars
Bewertet in den USA am13. März 2023
I purchased the taller model and it is perfect for the work I’m doing.
BDS
Bewertet in den USA am2. Dezember 2022
The 4ft x 4ft Bora centipede work stand provides 9 points of contact to support larger sheet goods while you're working on them. You could also lay a sheet of plywood across it and use it as a portable table.The weight is reasonable, and it has a carry strap to keep it together while you're transporting it. Setup is quick as you simply pull the ends apart to expand it. Be sure it is expanded to full width before attempting to use it. Working height is comfortable.Overall it is reasonably stable. It warns you not to stand on it, but I did just to test it, and didn't have any issues.It was usable on a gravel surface as well as smooth concrete, which is useful.If you are trying to cut a sheet in half, you may want to buy some of the accessories to provide a wider holding surface or rotate the sheet so you are cutting diagonally across the centipede as the layout of the 9 points of contact would leave one side with less than optimal support. The top supports have a hole for mounting accessories, but it would be useful for them to also have a small hole to put a screw through. My thinking is that if you could easily mount and replace sacrificial wooden standoffs between the workpiece and the top supports you wouldn't have to worry so much about hitting the supports when cutting or drilling through the workpiece. It would also give an easier way to temporarily attach a tabletop.At nearly $200, this is also a quite expensive option. Still, for someone who needs a portable work surface or who does a lot of work on sheet goods I can see the value.
Produktempfehlungen
