Ihr Warenkorb ist leer
Ihr Warenkorb ist leerWir können kundenspezifische Kabel herstellen
Sabine Jette Baumeister
Bewertet in Deutschland am 11. März 2025
Funktioniert 1a für einen Field Monitor
Oz
Bewertet in den USA am8. Oktober 2024
It fits well but apparently does not make good contact. I used once and two months later I threw it away but kept the transformer. It stopped energizing the camera.
Customer
Bewertet in den USA am27. September 2024
Does what it is supposed to do. Nothing fancy
Alan Longer
Bewertet in Frankreich am 25. Juli 2024
Produit excellent en présentation et en performance.Complètement satisfait de mon achat
Andre
Bewertet in den USA am25. August 2024
Works as described. One Female 5.5x2.2.5mm plug to receive power and another 5.5x2.5mm female jack to pass power along. I use one NP-F battery to power my camera, field monitor and wireless transmitter via a power junkie (Although there are many NP-F plates on the market).Using a new NP-F970 clone (8800 mAh) I was able to run my rig in constant record/transmit mode for about 1.5 hours. I am sure I can stretch another 1/2 hour to 45 min with some of the newer 10k mAh batteries on the market. This configuration will burn through older/less efficient batteries in less than an hour. Some of my older batteries (> 6 years) didnt last 1/2 hour. Since I never record in full 1 hour spurts, this should probably last 2-3 hours in standard record/pause mode w/good batteries, and longer if I do not wirelessly transmit.These connectors are excellent for those consolidating to an NP-F battery strategy. I have purchased three in total, as I also use one on my gimbal.Advice - understand the wattage draw from each of your devices. These plates usually cannot handle more than 20w consistently with a peak of about 28w. Stringing together too much stuff may cause problems.
Enns
Bewertet in Deutschland am 14. Mai 2024
Gut
Produktempfehlungen
16.68€
7 .99 € 7.99€