Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Please kindly note that developers are the most common users of FireBeetle Board-ESP32. For Arduino IDE, all GPIO function, I2C/SPI communication has been working.
FEATURES
Compatible with products in the DFRobot FireBeetle serials
Low-power consumption(the electricity current under ultra-low power is 10μA)
Quick Response(the top frequency is 400KHz)
Cost-effective
Small size, convenient to install
SPECIFICATION
Working voltage: 3.3V
Input voltage: 3.3V~5V
Support electric current of low power consumption: 10 μA
Support maximum discharge current: 600mA
Support maximum charge current: 500mA
Support USB charging.
Processer: Tensilica LX6 dual core processer (One for high speed connection; one for independent programing).
Frequency: 240MHz
SRAM：520KB
Flash：16Mbit
Wi-Fi standard：FCC/CE/TELEC/KCC
Wi-Fi protocol: 802.11 b/g/n/d/e/I/k/r (802.11n, high speed can reach to 150 Mbps), converge A-MPDU and A-MSDU, supporting 0.4us protecting interval.
Frequency range: 2.4~2.5 GHz
Bluetooth protocol: Comply with BR/EDR/BLE standard of Bluetooth v4.2.
Bluetooth audio: the current under low power consumption of CVSD and SBC is 10μA
Working current: 80mA in average
Frequency range: 2.4~2.5GHz
Support one-key downloading.
Support micropython.
On-chip clock: 40MHz crystal and 32.768 KHz crystal.
Digital I/O: 10 (default setting of arduino)
Simulative input: 5(default setting of arduino)
SPI: 1 (default setting of arduino)
I2C: 1 (default setting of arduino)
I2S: 1 (default setting of arduino)
LED_BUILTIN：D9
Interface: FireBeetle series compatible
Working temperature: -40℃~+85℃
Dimension: 24 × 53(mm)/0.94 x 2.09(inches)
The dimension of mounting hole: inner diameter 3.1mm; outside diameter 6mm.
VG
Bewertet in Deutschland am 15. Mai 2023
Funktioniert einwandfrei, betreibe es mit Lipo Akku
Produktempfehlungen
