Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Achtung:
1. Bitte stellen Sie sicher, dass Ihr Induktionskochfeld mit dieser Induktions-Adapterplatte kompatibel ist.
2. Stellen Sie sicher, dass Sie den Teller abkühlen lassen, bevor Sie ihn aus dem Kochfeld nehmen.
3. Nicht gießen, um es zu kochen.
4. Bitte außerhalb der Reichweite von Kindern verwenden.
5. Berühren Sie die Kochplatte nicht direkt mit den Händen.
Yubi
Bewertet in den USA am21. September 2024
This Deftimirc stainless steel induction hob converter plate does work on induction. While we try to figure out how to remodel our kitchen, we've been using several portable induction cooktops which is a huge improvement from the old built in electric coil Jenn Aire cooktop. The induction cooktops are so much faster, efficient, and easier to clean than the coil electric cooktops.The problem with the cheaper induction cooktops is that the actual induction coil area is usually not as large as the design/outline on top of the cooktop; so anything outside will not cook/brown very well. You'll get some weird looking pancakes or searing on your steaks, if you don't move the food or pan around to be inside that coil.I've been trying these converter plates and this one is much larger than some of the others, so I thought it would help cook items in a larger 9 inch base frying pan more evenly. However, the plate is designed to have some bumps on one side. So if you put the plate with the bumps on the bottom, the contact area with the induction unit is only on the bumps. Flip it over and the larger pots and pans are sitting on the bumps which kind of defeats the purpose of using this plate. The larger pans would spin around while using with the bump side up, so it didn't work as planned.However, if you've got a pot which will fit inside those bumps, about 7" max, then this plate will work. Unfortunately, I wanted to use it for a larger 9" base frying pan so it won't work. However, when we remodel our plan is to install both a high BTU range burner gas stove and an induction cooktop, so we can have the best of both. I can later use this with the bumps side down (and the other smaller) stainless steel plates on the gas stove for simmer settings.Otherwise, the build of this plate seems very good, didn't find any sharp edges. It also has a removeable metal handle to lift the plate (there's a notch cut out) although you have to be very careful when the plate is hot and make sure it cools down. I find the removeable handles to be better than the handles that are permanently attached, as the permanent handles stick up and that sometimes makes it unusable on larger cookware.
Karli
Bewertet in den USA am13. Dezember 2024
First time we used it it did not seem to work. Subsequent tries it has worked as advertised, provides slow steady heat. A great way to keep the old pans and use an induction burner After the first time, it now works very well and even boils water quite quickly.
Produktempfehlungen
