Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Tobias
Bewertet in Deutschland am 9. Januar 2025
Einfach perfekt
Thomas Jovic
Bewertet in Deutschland am 6. Januar 2025
Ich bin positiv überrascht, hat meine Erwartungen übertroffen.
David
Bewertet in Deutschland am 20. März 2025
Passt. Benutzt um Halbachse zu demontieren und montieren . Alles gut
Manijeh Mamamesgarha
Bewertet in Deutschland am 18. Januar 2025
Alles war super
Adam H
Bewertet in Großbritannien am 16. Februar 2025
Not had these long so can’t speak for long term use, however going myself needing a bit for a stubborn sump plug and these did the job nicely. Fit well in the ratchet and are clearly marked. The box is nothing special but does the job keeping them in place and in order. Excellent value so far.
christoph
Bewertet in Deutschland am 11. März 2025
Die Nüsse halten gut was aus perfekt
Schendel Rolan
Bewertet in Deutschland am 11. Februar 2025
Vielen Dank
Angy & Manu
Bewertet in Italien am 6. November 2024
Nel complesso questo set è ben fatto, la qualità delle brugole è buona sonoabbastanza resistenti alla deformazione.Non ho riscontrato difetti di produzione.Il case è realizzato in plastica, è di poche pretese, ma fa il suo dovere.Consiglio l'acquisto.
Alessandro
Bewertet in Italien am 25. November 2024
Il kit comprende un assortimento di chiavi a brugola da H5 a H19, sono molto resistenti e hanno una copertura che le protegge dalla ruggine.Vengono fornite con una custodia in plastica rigida per contenerle e trasportarle, ogni bussola ha il suo posto e rimango sempre perfettamente organizzate e salde.Le bussole sono adatte sia ad avvitatori che adottano l’anello a pressione sia a quelli con il perno sferico a molla, cosa molto apprezzata. Io ad esempio ho un avvitatore pneumatico con l’anello a pressione mentre le chiavi manuali e le dinamometriche con il perno a molla e così le posso utilizzare senza problemi su tutte senza dover utilizzare adattatori.Ho utilizzato questo kit per smontare e rimontare la testata e le bielle di un compressore e non ho riscontrato nessun problema, sono molto soddisfatto!
J. Harris
Bewertet in den USA am23. Oktober 2024
This product is a ten-piece set of Impact Allen Bits with a ½” drive. The tools are made from S2 tool steel with a hardness of 58-60 on the Rockwell “C” Scale. These bits are finished with a smooth manganese phosphate finish. The individual bits are laser engraved with the manufacturer’s name (GETLITOOL), the steel specification (S2), and the SAE size of the bit in a stylized box on the square drive section of each tool.The ½” square drive design of the tool is stress relieved. Each square drive employs a “radius corner design” where the 90° inside corners of the square-drive socket are radiused (i.e., rounded and expanded) to prevent the accumulation of stress and the eventual cracking of the steel and failure of the tool. This is especially important for those tools that are designed to be used with an impact drive tool. Each ½” square drive has two drilled through latch positions in the drive to make the engagement with the drive tool easier.The bits are supplied in ten SAE sizes. They sizes are: 1/4”, 9/32”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, and 3/4”. The tools are provided in a red blow-molded, HDPE case with two molded-in latches and a self-hinge. There are dedicated slots for each tool in the case, but the dedicated slots do not have molded-in size markings.The Amazon page mentions that the set is supplied with two “O”-rings and two pins. These would be used with certain impact tools to aid in tool retention. These accessories were not present in the case or the box that was received.This tool set was inspected for quality and no issues were detected. Critical dimensions were measured with a dial caliper. The Allen hex measurements were within specification as were all of the ½” drive sections of each tool. The finish of the tools was impressive and the laser markings were well done. The blow-molded case should be a two-piece case with a true hinge to ensure it will last as a proper place to store the tools. The self-hinge is easier to manufacture but will fail much more rapidly. Molded-in size markings would have been a very nice addition to the tool case. This is a very nice tool set and a good addition to anyone’s toolbox. Well done.
Jens Stenzhorn
Bewertet in Deutschland am 22. Dezember 2024
erster Einsatz sehr gut überlebt, Qualität zeigt sich nach längerem gebrauch erst
Am
Bewertet in Großbritannien am 22. November 2024
These 1/2" torx bits seem like decent mid range tools to me. The quality, machining and finish seem good, and the included case although just blow moulded plastic feels pretty sturdy and durable. I'm not convinced the smaller sizes are really suited to being used with 1/2" tools / air tools, but I've not had any issues using them so far with a bit of consideration.No complaints.
Mombach Yann
Bewertet in Deutschland am 21. Dezember 2024
Gute Qualität
Produktempfehlungen
14.51€
6 .99 € 6.99€
41.27€
20 .99 € 20.99€