Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Dieses Teil passt auf folgende Modelle:
- BMW 3 Touring 318 d (2004 - 2012) 105kW
- BMW 1 Schrägheck 118 d (2006 - 2012) 105kW
- BMW 3 Touring 320 d (2004 - 2012) 130kW
- BMW 3 Stufenheck 320 d (2005 - 2011) 120kW
- BMW 1 118 d (2003 - 2013) 105kW
- BMW 3 Stufenheck 318 d (2005 - 2011) 105kW
- BMW X1 Kombi sDrive 18 d (2009 - 2015) 105kW
- BMW 3 Stufenheck 320 d (2005 - 2011) 130kW
- BMW 1 Schrägheck 116 d (2006 - 2012) 85kW
- BMW 1 Schrägheck 120 d (2006 - 2012) 130kW
Bitte kontrollieren Sie, in der Produktsuche Leiste oben, ob dieses Produkt zu ihrem Auto passt.
Entsprechende Artikelnummern:
BMW (18.30.7.797.591); BMW (18.30.7.800.704); BMW (18.30.7.812.285); BMW (18.30.7.812.286); BMW (18.30.7.812.283); BMW (18.30.7.812.287); BMW (18.30.7.812.281); BMW (18.30.7.797.642); BMW (18.30.7.812.279)
Marc Uecker
Bewertet in Deutschland am 16. April 2025
Everything you need to (re-)mount the DPF on an F34 320d (2014 model).The gasket fits perfectly and looks the same as the original. (The fingers go into the turbo side btw.)The downpipe clamp mounting the dpf to the turbo also looks like the original for the most part (with similar difficulties). It was a bit hard to get tight because the nut on the back side spins with too little hold, and is hard to tighten with a wrench on just one side. Ideally use a spanner on the back (bottom) to keep the nut from spinning, and then tighten from the top.The exhaust pipe clamp fit perfectly, and looks much nicer than the old one, which we had to cut off with a flex because it was rusted tight.
Produktempfehlungen
