Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Spezifikationen:
Teilenummer: FCX18-02
Stangenmaterial: Edelstahl
Stangenendmaterial: Kunststoff
Drehpunktkugeln Material: Messing
Gewicht: 31 g (1,09 Unzen)
Lieferumfang:
1 * Set Hoher Freiraum-Links
knoffi
Bewertet in Deutschland am 29. Januar 2025
Hallo,es ist ein gutes Upgrade für euren Crawler (habe die Links für einen FMS FCX18 LC80 geholt), es sollte euch bewusst sein, dass die Teile nicht vormontiert sind und ihr hierfür keine Anleitung habt!Teile passen sehr gut und sind sehr gut verarbeitet und gefallen mir etwas besser, als die Messing Pendants, die Injora ebenfalls anbietet.Warum dann nur 3 Sterne? Wie abgebildet sind es 8 Links demzufolge sollten es 16 Verbindungsstücke sein, leider waren nur 15 im Set enthalten...es ist sehr ärgerlich, da es bereits ein zweites Set war, in dem Teile gefehlt haben!
Customer
Bewertet in den USA am21. April 2025
Welp took everything out of the package to assemble and one of the threaded pegs were broken off the link. Everything from injora I've bought has been top notch but this was depressing.05/05/2025 Edit: I received a message from injora saying they would replace my broken item and sure enough today they sent me a package with new links...thanks for the excellent costumer service!
Rebecca Marine
Bewertet in den USA am29. April 2025
These do not fit fcx18 lc80 with angled drive shafts. None of them are the proper length the front uppers are 1/2inch to long the front lowers are the same and the rear are to short all uppers and lowers are the same length on the aftermarket so no special place they can go but the factory are shorter than the back on all rods so will not work. They my fit a fcx18 that is newer with straight drive shafts but will not fit mine.
FrankWw
Bewertet in Deutschland am 6. August 2024
Grundsätzlich ok. Der Zusammenbau ist etwas fummelig.Achtung Einbaurichtung der Kugelköpfe beachten. Die minimal größere Kopfseite verhindert das Abspringen des Kopfes und sollte immer auf der Seite montiert sein, zu der der Kopf abspringen könnte.Man muss die Kugeln mit etwas Fett einpressen, da sie sonst zu schwer gehen und eine saubere Federung verhindern.Ich habe sie in meinen FMS FCX18 LC80 eingebaut, für den sie beworben werden.Leider sind oberer und unterer Lenker ca. 1,5mm zu lang gegenüber der originalen Lenker.Damit sitzt das Rad nichtt mehr mittig im Radhaus.Das ist optisch nicht schön und macht Probleme beim vollen Einfedern hinten und beim Einschlagen der Räder vorne.Ich habe sie dann wieder ausgebaut und die Original Teile eingebaut.Der Raumgewinn (Bodenfreiheit) ist aus meiner Sicht zuvernachlässigen, zumal die Kardanwelleja auch gerade hoch geht und bei Verwendung der gebogenen Unterlenkern völlig ungeschütz ist.
Johnny Hidalgo
Bewertet in den USA am2. Oktober 2024
I wish they were put together at the factory but that's ok. They go together pretty easy. They also fit the fms stock ball screws at the bottom of the stock fms shocks which is nice while I wait my injora shocks to arrive. I didn't use the smaller ones that replace the y connectors because I don't need them.
Robert
Bewertet in den USA am12. März 2024
First, these DO FIT the FCX18 LC80. I have them on mine and they are great, look great, work great, no problems. With that said, you do need to know what you're doing. There are no instructions. RC crawlers are NOT a "plug & play hobby". I did not need to do anything "outside the box" to get these to work. Just used the parts they gave and everything went together just fine. Not a fan of having to put the links together, you need to screw on the black parts, as it can be hard to keep things tight and lined up but if you take your time you'll be fine. Youtube has videos on how to do it as well and there are plenty of forums to look at if you get stumped. 4 out of 5 stars due to the annoyance of having to build the links. Look great on the truck and work great as well!
Flynt Flossy
Bewertet in Kanada am 11. Dezember 2024
missing brass balls, cannot install
Produktempfehlungen