Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Elite Sealed Shift Kabel & Gehäuse Sets schützen vor Schmutz, Wasser und anderen Verschmutzungen. Kompatibel mit Straßen- und Mountainbikes. Die Kits enthalten ein ultraglattes, poliertes Innenkabel zusammen mit einer durchgehenden Slick-Lube-Auskleidung, um sicherzustellen, dass Schutz vor den Elementen nicht zu Lasten der Top-Performance kommt.
- Elite Ultra-Slick polierte Innenkabel und Slick-Lube Einsätze reduzieren die Reibung drastisch.
- Gewindedichtungen werden an den Enden der Einsätze angebracht, um Verunreinigungen aus dem Kabelsystem fernzuhalten.
- Kleine Teile sind im Lieferumfang enthalten, für die Installation entweder auf Dropbar oder Flatbar Bikes.
- Enthält genug Gehäuse für die gesamte Länge des Gehäuses, das auf den meisten Fahrrädern läuft.
- XEX Gehäuse ist 30% leichter als herkömmliche Schaltgehäuse.
- SRAM / Shimano kompatible Kabelenden.
Roberto prota
Bewertet in Großbritannien am 15. Januar 2022
It is Just the BEST housing/cable/sheet combo that I ever installed in my bike. Just installed in my internal routed bike that if you know they are a nightmare to work properly inside the frame because of friction or how careful you will need to re route all of it. But with these it is just incredible great, the shifting performance increase like magic, now when you try to shift it’s required minimal force to do every click. I will buy another one to external routed to another bike for sure. Highly recommended !
Bcron
Bewertet in den USA am19. April 2022
I was in the market for new inners and outers on my 2x9 Sora gravel bike last summer, and after tearing the bike down, aligning the rear derailleur, and installing these cables, one of the first things I noticed is that the shifting was about as buttery smooth as my Ultegra road bike. It really breathed some life into my gravel bikes lower-mid-range groupset. I've taken it on a couple longer gravel rides in some Minnesota springtime mud, standing puddles in reddish clay that dries like concrete on the frame, and thanks to the sealed cables, haven't had any issues with that mud working its way into the outer by the rear mech. Installation was fairly easy, just a couple extra steps, sliding the liner through.
Taipan
Bewertet in Deutschland am 25. Dezember 2021
verbaut in in einer Sram 1x11. schaltet sehr gut. Anleitung könnte besser sein. wie man die Gummi-Wasser Abdichtungen montiert fehlt z.b.
Francois Rainville
Bewertet in Kanada am 6. Oktober 2020
I was afraid at first since it was my first time recabling my gears completely, however the instructions are pretty clear and installation is quite easy.I would recommend to anyone who need to recable their gears, I truly think this is the best option.
Customer
Bewertet in Großbritannien am 20. Dezember 2020
I found this very easy to fit. Instructions good, and all bits needed in the pack.I am keen but not hugely skilled home bike mechanic (own a good torque wrench, but don’t own any bearing drifts etc.)This was really easy to fit even in my internally routed bike. (It just requires a little planning)
Customer
Bewertet in den USA am24. April 2020
Installed this kit on my 11 speed mixed group mountain bike, Shimano XTR crank and derailleurs with SRAM XX1 cassette and SRAM XX1 Eagle chain. These cables are so much better then the XTR cables. Silky smooth inner cables and no coating peeling off. Easy to install and set up. Shift lever action is noticeably smother and easier. I swear the bike also shifts smoother now even though I had the rear derailleur dialed in perfectly before but maybe a hair one way or the other smoothed it out more on the trails.
Produktempfehlungen
15.99€
6 .99 € 6.99€