Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDas Dso138Mini ist eine verbesserte Version des beliebten Dso138 DIY-Oszilloskop-Kits. Alle Teile, die zum Vervollständigen benötigt werden, sind im Lieferumfang enthalten. Zusammen mit Montageanleitung (evtl. nicht in deutscher Sprache) und einem Bedienungsanleitung (evtl. nicht in deutscher Sprache) kann mit USB oder einer einzelnen Lithium-Ionen-Batterie betrieben werden. Die Gesamtgröße von Dso138Mini beträgt nur 2 3 von Dso138, wodurch es viel besser für den manuellen Betrieb geeignet ist. Es gibt eine Vielzahl Weitere Verbesserungen, die in der vollständigen Beschreibung unten zu sehen sind
Jacqueline Caren
Bewertet in Großbritannien am 15. Oktober 2023
Many parts were missing including the xtal and cap potsResistors were 5% which is pretty low quality.
joel
Bewertet in Deutschland am 19. Dezember 2021
I had to make 20k resistor by putting two 10k in serie and at least another resistor wasn't on the part bag. And customer service doesn't work!!!wtf
Customer
Bewertet in Großbritannien am 19. Juni 2021
Although this kit was fun to make and worked first time I was very disappointed to find out that for £30 (and no case) the seller shipped such an old product. I received a product with the main board version "H", analogue board "F" and firmware version -110 (This is a Dec 2018 release!!). Jyetech now sell a product with the main board version "I" and analogue board "J" and several firmware versions later -116. On firmware version 110 the oscilloscope performance is relatively poor although it can be updated to 116 using details available on the Jyetech website. Software and a serial USB converter is required to do this but updating the firmware on my unit was successful and improved the performance. It also unlocked some additional features. I had intended to purchase a case for this unit but again because the boards are so old a suitable case is not available to purchase in the UK. The switches on the older analogue board are top facing rather than front facing and therefore a case where the top has slot cut-outs for both the switches and buttons is necessary. I have not been able to find such a case as the new type has slots cut into the front panel only for the buttons. In summary, I enjoyed building the kit and it works fine but for the price it's a bit of a rip-off when much newer boards are available. My product didn't even come with a on/off switch where the newer boards now have this fitted. Nooelec need to update their stock or charge much less!!
Nico
Bewertet in Großbritannien am 26. März 2018
Worked in one go after careful assembly
Produktempfehlungen
295.00€
99 .00 € 99.00€