Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

KUSBA: Klipper USB Accelerometer

Kostenloser Versand ab 25.99€

31.12€

14 .99 14.99€

Auf Lager

Info zu diesem Artikel

  • Erleichtert das Messen von Resonanzen durch Vereinfachung der Verkabelung und Konfiguration erheblich
  • Sie benötigen nur diese Leiterplatte und ein USB-C-Kabel, keine komplizierten und unzuverlässigen SPI-Leitungen
  • Kompatibel mit jedem 3D-Drucker mit Klipper und hat einen freien USB-Anschluss
  • Kommt mit (Rampon Anchor) Firmware vorgeblitzt


KUSBA ist eine Leiterplatte, die entwickelt wurde, um Klippers Eingangsformung viel einfacher zu machen, indem die Verkabelung und Konfiguration für die Messung von Resonanzen vereinfacht wird. Es ist ein MCU und der ADXL345-Beschleunigungsmesser auf einer Leiterplatte. Sie benötigen nur diese PCB und ein USB-C-Kabel, keine komplizierten und unzuverlässigen SPI-Leitungen! Kompatibel mit jedem 3D-Drucker, auf dem Klipper läuft, und verfügt über einen freien USB-Anschluss. Kommt mit (Rampon Anchor) Firmware vorgeflasht, so dass Sie einfach Ihre Klipper Konfiguration bearbeiten, den KUSBA anschließen und mit der Messung von Resonanzen beginnen können.


Abelard Lindsey
Bewertet in den USA am3. Januar 2024
I had read about Resonance Compensation and Input Shaping when I first setup Klipper, but when I saw the scary "mounting the accelerometer" photo in the docs I threw the idea into a "yeah, right, that would be nice category" and went on with other things.That was until I was browsing printables one day with my printer model in the search (an Elegoo Neptune 3 Pro) and came across some "kusba" mount files. Which lead to searching to figure out what the thing was, which led to the amazon order. Just a few days for the package to arrive (I printed a mount in the meantime) and less than 30 minutes after that I had my resonances measured, graphs generated and all new acceleration settings in my printer.cfg.The firmware was already installed on the KUSBA, the directions were clear and easy to follow and my print quality and speed shot up immediately (run a pressure advance after you have done your resonance).I am currently upgrading my hotend so I will be retuning after that, and I am thrilled that the process is as simple as it is. Highly recommended for any klipper users and tinkerers.
Scott McCrory
Bewertet in den USA am18. Mai 2024
There are a lot of great YouTube videos and instructional articles about how to use these to optimize input shaping and eliminate ghosting so that you can increase print speeds and accelerations. Most printers also Have 3-D printable adapters on the common model websites.
Orlando
Bewertet in den USA am25. Oktober 2023
I bought this for my Elegoo Neptune 4 Pro after doing some research. Following the calibration steps seemed easy, I found a bed mount and an extruder mount so that I could test X and Y separately since this is a bedslinger.The instructions weren't quite foolproof because I kept getting an error when probing the accelerometer (got ff vs e5). I had followed the instructions to get this configured, but didn't realize that my printer config file already had settings that were overwriting what I was configuring. Check your printer.cfg for an adxl345 section and a resonance_tester section if you receive this error.While attempting to fix the error myself, I was able to successfully, and easily, flash Klipper onto the device without issue, and was also able to easily flash it back to Rampon, which it originally came with. The device is very compact and very easy to use, but you will have to know a few things about your printer, like how to SSH into it so you can install some apt and pip packages. This isn't difficult, but you'll need to know how to do that for your specific printer to get anywhere with this.I reached out to xbst on the official KUSBA github page (you can also drop into their Discord) and they were helpful in quickly getting me to correct my mistake so I could get to calibrating. Solid engineering and great customer service.
Lazyjai
Bewertet in Kanada am 2. November 2023
Works amazing, easy to use just follow the instructions from the QR. Got input shaping done on ender 3 with klipper in under 5 mins.
Craig Williams
Bewertet in Kanada am 12. November 2023
So easy to use, nonwiring tondeal with and works great! Was able to calibrate 2 printers in under 30 minutes.
Produktempfehlungen