Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

LM317 DC-DC Wandler Einstellbare Buck Netzteil Step Down Converter Modul 4,2-40V Abwärts Leiterplatte Regler-Stromversorgungsmodule mit 24 AWG-Draht(5 Stück)

Kostenloser Versand ab 25.99€

8.89€

3 .99 3.99€

Auf Lager

Info zu diesem Artikel

  • ⚡ [Moduleinführung] Einstellbarer Linearregler, Ausgangsstrom: 1,5 A (kleiner Wert), 2,2 A (typischer Wert). Eingangs- und Ausgangsspannungsdifferenz (VI-VO): 40 VDC (großer Wert). einstellbarer Ausgangsspannungsbereich: 1,2 ~ 37 V. Eingangsmodus: VIN-Eingang positiv, GND-Eingang negativ, Ausgangsmodus: VOUT-Ausgang positiv, GND-Ausgang negativ.
  • ⚡ [Anpassungsmethode] Schließen Sie zuerst die Eingangsstromversorgung richtig an (zwischen 40-4,5), verwenden Sie dann ein Multimeter, um die Ausgangsspannung zu überwachen, und stellen Sie das Potentiometer ein (normalerweise im Uhrzeigersinn zum Boosten, umgekehrt im Uhrzeigersinn zum Buckeln).
  • ⚡[Anwendungsbereich] Der Anwendungsbereich des Moduls umfasst einstellbare Spannungsreglermodule mit drei Anschlüssen, die alle Spannungsreglermodule mit drei Anschlüssen wie 7805, 7806, 7809, 7812 und 7824 ersetzen können.
  • ⚡[Geräteleistung] Fahrzeuggeregelte Stromversorgung, Sie müssen nur das Eingangsende dieses Moduls an den Zigarettenanzünder des Autos anschließen, um das Potentiometer mit Strom zu versorgen, und die Ausgangsspannung kann von 1,25 V bis 30 V eingestellt werden, um Ihr Handy aufzuladen Telefon, MP3, MP4, PSP usw. Gerätestromversorgung, einfach und bequem.
  • ⚡[Paket beinhaltet] Sie erhalten 5 x LM317 Netzteilmodul mit einstellbarem Regler, 2 x 50 cm/19,68 Zoll 24 AWG Kabel.


Parameters:
Output Current: 1.5A (min), 2.2A (typ)
Input-output voltage differential (VI-VO): 40Vdc (max)
Adjustable output voltage range: 1.2 ~ 37V
Operating temperature: -55 Celsius ~ +150 Celsius
Current output: 1.5A
Voltage Input: 4.2 ~ 40 V
Operating temperature: 0 Celsius ~ 125 Celsius
Characteristic frequency: 100MHz
Module size: 35.6 mm x16.8 mm
Input Method: VIN input is positive, GND Input Negative
Output Method: VOUT output positive, GND output negative
Maximum output current = 3/(input voltage - output voltage)
Note:
1.Because it is a linear step-down DC-DC circuit, the input voltage needs to be more than 3V higher than the output voltage to ensure the stability of the output voltage.
2.Adjustment method: first connect the input power supply correctly (between 40-4.5), then use a multimeter to monitor the output voltage and adjust the potentiometer (usually clockwise to boost, reverse clockwise to buck)
3.The module is linear, so the efficiency will not be very high. In order to improve the efficiency, there needs to be a voltage difference of 3V between the input and output. But the maximum voltage difference between the input and output should not exceed 30V, that is: the input-output is less than or equal to 30V, otherwise It is easy to burn out the module.
4. If you need short-circuit protection, please connect a self-recovery fuse in series with the input terminal.
Package includes:
5xLM317 Adjustable Regulator Power Supply Module
2x50cm/19.68inch 24AWG Cable


papas
Bewertet in Japan am 31. März 2025
スイッチングだとノイズがでるので、ファンの回転コントロール用に購入。期待通りの製品です。
koro neiju
Bewertet in Japan am 27. März 2025
この部品多岐にわたり使用できDIY電子工作に使用でき重宝しています。
Jeep Rock
Bewertet in Kanada am 28. Juli 2024
Ajustement de tension de sortie difficile. Le potentiometre est de mauvaise qualité.
Francisco
Bewertet in Spanien am 27. September 2024
el material de muy buena calidad el funcionamiento es muy bueno como la regulación y la informacion del vendedor
john Carpenter
Bewertet in Kanada am 17. Dezember 2024
Worked exactly as described.
Produktempfehlungen

10.78€

4 .99 4.99€

4.5
Option wählen

15.99€

6 .99 6.99€

4.7
Option wählen

25.42€

11 .99 11.99€

4.4
Option wählen