Ihr Warenkorb ist leer
Ihr Warenkorb ist leerLiliane
Bewertet in Frankreich am 2. September 2024
Très bon produit fonctionne très bien très bonne qualité. Ça reste du Makita
Francesco
Bewertet in Italien am 25. Oktober 2023
Ho acquistato questo modello, che non è il top di gamma, ma per dei lavori occasionale va più che bene. Ottima la qualità costruttiva, rumoroso come tutti questi tutti questi attrezzi, ma impostando velocità più basse taglia comunque bene e si riduce di molto il rumore. Soddisfatto dell'acquisto.
Daniel p.
Bewertet in Australien am 22. Mai 2023
a bit heavy but good
Benjamin Schreiber
Bewertet in Deutschland am 5. März 2022
Super würde ich immer wieder kaufen
K.T.
Bewertet in Deutschland am 25. Juli 2022
Nutze dieses Werkzeug wirklich gerne. Super praktisch. Halt mit Akku anstatt Kabel. Qualität sehr gut. Markita eben.
zwaeng
Bewertet in Deutschland am 21. März 2022
Das DTM50 Mulittool ist zwar schon zweifach veraltet, aber zur Zeit für wirklich sehr wenige Euros (107.-) zu bekommen. Das Nachfolgegerät DTM51 ist leider viel klobiger, schwerer und hat keine LED, die den Arbeitsbereich ausleuchtet. Das disqualifiziert diese Version. Die neue DTM52 scheint an vielen Stellen ein echter Fortschritt zu sein, ist aber preislich viel zu hoch angesiedelt für ein nur gelegentlich genutztes Werkzeug.Die DTM50 liegt super in der Hand, ist nicht ZU laut (trotzdem besser mit Gehörschutz arbeiten), arbeitet sehr zuverlässig und präzise. Gewohnte Makita-Qualität und ideal, wenn man sowieso schon 18V-Geräte hat. Sie hat keinen Schnellspanner, den ich aber nicht vermisse, da ich meist länger mit einem Tool arbeite und das Wechseln mit dem angeklemmten Imbus sehr schnell geht. Wer sehr lärmempfindlich ist und viel die Tools wechselt, sollte sich vielleicht doch die aktuelle DTM52 ansehen. Bin sehr zufrieden.
Fra
Bewertet in Deutschland am 24. Februar 2020
Super Gerät für den Heimwerkerliegt gut in der Hand, der Werkzeugwechsel ist Kinderleicht und dieLeistung ist für den Heimbedarf vollkommen ausreichend
Christine
Bewertet in Deutschland am 22. November 2019
Habe das Multitool meinem Schatz zum Geburtstag geschenkt, aber eigentlich habe ich es im Gebrauch und bin super zufrieden.Wir haben einen alten Dielenfußboden mit einem Profischleifer bearbeitet, aber kamen damit nicht in die Ecken und an die Ränder, das klappt mit dem Tool jetzt wunderbar.Ich bin zufrieden und kann das Teil besten Gewissens weiter empfehlen.
Christoph
Bewertet in Deutschland am 7. März 2017
Es ist eine gute Qualität und hat viel Power.Ich habe einen Akku mit 18V und 4Ah. Es macht richtig Spaß damit zu Arbeiten.Man kommt schnell und sauber an verbaute Stellen, wo man sonst erst alles zerlegen müsste.Ich würde es wieder kaufen.
UserOne
Bewertet in Deutschland am 19. Juli 2017
Mit einem 5 Ah Akku und dem entsprechenden Schleifaufsatz den kompletten Garagenboden (Estrich) abgeschliffen.Den wasserfesten Betonspachtel auf Kunststoffbasis ebenfalls mit diesem Werkzeug geglättet.Super Maschine und eine erhebliche Arbeitserleichterung keine Kabeltrommel/Verlängerungsschnur legen zu müssen.
LEONARDO OMAR NARVAEZ
Bewertet in Spanien am 26. September 2016
Tengo muchas herramientas a de makita y por eso me pedi esta que solo viene la maquina sin accesorios ni bateria.La maquina funciona bastante bien, no he probado de otras marcas pero no produce mucha bibracion en la mano a la hora de trabajar, la potencia es bariable y suficiente para los trabajos que desempeña,
Mr Casio
Bewertet in Großbritannien am 21. August 2016
Great tool!Pros:- Well built, as you'd expect from Makita.- Cuts really well, even with the cheap blades I have. (Hilka set for £13)- Slightly more oscillation movement than many other similar tools as far as I know. 3.2 degrees rather than 2.8 or 3 on many others.- Can be surprisingly quite when used at lower speeds, between 1 and 3 is not bad, especially for sanding and similar jobs. Although of course makes a bit more noise once you start cutting. Between 3-6 (maximum speed) it's still less than all other 18v ones as far as I know, although gets fairly loud. At high speeds I'd certainly use ear protection. At minimum speed with no material contact I measured about 65db from about 1ft away. Similar to a large room fan. At maximum speed while cutting soft wood with a wide blade I measured about 105db which is a lot. (Disclaimer: For safety please check the user manual.)- As far as I know this also has the least hand vibration compared to other 18v oscillating tools (Disclaimer: For safety please check the user manual.) I think this actually vibrates less than my cheap rotary tool, although of course when starting to cut material the vibration increases a bit. I hate vibrating tools but this wasn't bad at all for me.- Has a nice LED light at the front. This is why I chose this older model. Also there was about a £40 price difference which for me is worth it, as I can spend that on batteries or blades. I saw a cutting video on Youtube comparing the two, the noise seemed to be the same and the cutting speed seemed to be the same. This slightly older version is slimmer which is nice, and it has no quick release for the blades, which is perfectly fine for me. I have no problem with an extra 25 seconds to change the blade. A large hex key clips into the bottom of the unit and is easy to remove from its clip when needed.- Has an optional dust extractor accessory that costs about £12 if I'm not mistaken.I have Bosch 18v batteries, but the bosch multi tool is louder, it can't stand upright which is important for my small home-workshop, and costs double (Approx £160 vs £80) so for that price difference I had no problem just buying some Makita batteries. Two genuine ones are about £77 on Amazon right now, but I decided to save a bit with a non-original. I'm using a "Masione" 3Ah that cost £20 and it's working just fine so far.Cons:- Even though it's supposed to be the quietest option, it's still lot of noise. Certainly much more than an 18v jigsaw. Not a problem for a workshop (use ear protection obviously) but for my small studio with a cat it's too loud at high speeds when cutting. Not an actual issue with the tool but worth mentioning.My rotary tool is a bit quieter at maximum speed, but doesn't do all the same jobs, and also throws a lot of dust and sparks everywhere, compared to this which is slightly more clean, although still creates dust obviously. So for those times I want to work on small projects with a bit more quiet, I'll just have to build myself a noise isolating "glove box" which is also really nice for not getting dust everywhere.-No quick release for the blades. Not a problem for me.Conclusion:Extremely pleased with the tool, but for some of my uses I will need to make a box with a window to dampen the noise.It won't sand as well as a dedicated sander, and it won't cut as well as a jigsaw, etc. - But it's great for making small cuts, working in areas where other cutting tools won't fit, etc. I would say it's a great addition, but not something to replace all others.
skippy84
Bewertet in Deutschland am 19. Oktober 2016
Mein Vater hat sich das Gerät zu Weihnachten gewünscht und er ist begeistert. Es ist so vielseitig. Manchmal staune ich was mein Vater damit so alles basteln kann. Aber Makita ist natürlich auch eine sehr gute Marke und mein Vater benutzt keine andere Werkzeuge.
Produktempfehlungen