Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Nano 328P V3 Entwicklungsplatine mit 328P USB-Kabel AYWHP Nano Entwicklungsplatine mit Chip CH340 5V 16M Microcontroller Micro Stecker Kompatibel mit Arduino

Kostenloser Versand ab 25.99€

6.69€

2 .99 2.99€

Auf Lager

Info zu diesem Artikel

  • 【Nano Mikrocontroller】 Nano mit 14 digitalen I/O Pins, 6 analogen Eingängen, einem 16MHz Quarzoszillator, einer USB-Strombuchse, einem ICSP Anschluss und einer Reset Taste
  • 【Leistungsstarke Leistung】Ausgestattet mit leistungsstarker MCU, unterstützt das Herunterladen vom ISP und die Stromversorgung über USB.
  • 【Einfach zu bedienen】Kompatibel mit Arduino nano , vollständig kompatibel mit Windows, Mac und Linux Betriebssystemen, sehr benutzerfreundlich für Anfänger
  • 【Praktisch】 Stromversorgung über USB-Anschluss; Externe ungeregelte 6-12V Stromversorgung oder externe geregelte 5V Stromversorgung. Erkennt automatisch die Stromversorgung mit dem höchsten Potenzial und schaltet auf diese um, sodass keine Stromauswahlbrücken erforderlich sind.
  • 【Hochintegriert】Eingebauter CH340G Mikrochip sorgt für eine stabile Verbindung mit dem Computer und vereinfacht die Programmierung und Datenübertragung.



Produktinformation

Entwicklungsplatine mit USB Kabel

Entwicklungsplatine mit USB Kabel

beschreiben:

Es handelt sich um ein leistungsstarkes Entwicklungstool, das für eine Vielzahl von DIY-Projekten und professionellen Anwendungen geeignet ist. Der Mikrocontroller des Motherboards bietet überlegene Rechenleistung und Stabilität. Der integrierte CH340G-Mikrochip sorgt für eine nahtlose Verbindung mit dem Computer und macht die Programmierung und Datenübertragung für Benutzer bequem.

Entwicklungsplatine mit USB Kabel

Parameter:

Arbeitsspannung: 5V

8 analoge Eingangsanschlüsse: A0~A7

14 digitale Ein-/Ausgangsanschlüsse: TX, RX, D2–D13

6 PWM-Anschlüsse: D3, D5, D6, D9, D10, D11

1 Paar serielle Transceiver-Ports mit TTL-Pegel: RX/TX

Maximale Taktfrequenz: 16 MHz

Hauptprozessor: AVR

Programmspeichertyp: EEPROM, FLASH

Entwicklungsplatine mit USB Kabel

Verwendung:

1. Laden Sie die IDE-Programmiersoftware herunter

2. Laden Sie den USB-Chip-Treiber herunter

3. Legen Sie die Nano Karte ein und der Treiber wird automatisch installiert.

4. Wählen Sie in der IDE die Registerkarte NANO.

5. Wählen Sie den COM-Port aus und schließen Sie die Nano Karte an diesen Port an.


Dagmar Bluhm
Bewertet in Deutschland am 5. Januar 2025
Wollte meine DJI Drohne nach Jahren mal wieder steigen lassen und die Akkus der Drohne laden ... Das "super intelligente" Ladegerät von DJI verweigerte das und legte die Akkus still ... Die Akkus hatten ca. 5 Ladezyklen und waren eigentlich neuwertig ...DJI hat in den Akkus ein tolles Selbstentladungsprogramm mit Stilllegung eingebaut ... Meine 18650 Akkus liegen seit Jahren vollgeladen problemlos herum ...Ein wenig im Internet recherchiert und eine Lösung gefunden ... Die Akkus müssen entweder mit einer Andurino Nano Platine oder mit einer CP2112 Platine umprogrammiert werden ...So weit, so gut ... Beide Platinen für um die 4-5 Euro gekauft, wobei die CP2112 Platine erst in 2 Wochen geliefert wird ...Nach Anleitung im Internet alles heruntergeladen, installiert und eingerichtet, danach die Platine an die Akkus angeschlossen und Programmierung durchgeführt ...Alles läuft wieder bestens ... 👍Empfehlung von mir, wenn man das gleiche Problem hat und keine 100+ Euro für einen Akku ausgeben möchte ... Eines weiß ich nun, nie wieder eine Drohne von DJI ...
Mike W.
Bewertet in den USA am31. Januar 2025
This Nano board does what it is supposed to do, no surprises there. The CH340 chip requires a driver install if you are on Windows, but that is expected with clones. Build quality seems fine, and it worked right away with Arduino IDE. The included USB cable is pretty short and not great, but at least they included one. My only real gripe is the Micro USB port instead of USB-C, which just feels outdated at this point. If you need a cheap Nano for a project, this will get the job done.
dumgoat
Bewertet in den USA am7. Oktober 2024
This Arduino Nano V3 from AYWHP works very well. The only downside is it utilizes a Micro USB port, but in some cases, that may be exactly what you need.The package includes a Micro USB cable and header pins that need to be soldered on. The soldering process was quick and easy. The USB cable works but is very short.The pins are all clearly labeled on the board, and it connected via the Arduino IDE version 2.3.3 without any extra steps or issues.Overall, this is a good quality development board, and I haven't run into any problems with it.
Kn
Bewertet in den USA am29. Oktober 2024
I have a few of these nano clones. This one works as well as any of the others at a good value for the money. It is a little trickier to establish communication with the board but everything else works as a nano board should. Overall this is a good value to have a few extras on hand for future projects.
tool_nut
Bewertet in den USA am13. Oktober 2024
This Nano board is well constructed and lends itself to integration into physically small projects.I used this one for controlling photographic lighting in the woods depending on several possible inputs. It worked out as expected. The sketch I wrote worked the 1st time - always a plus!I plan on using others.
Mike Hunt
Bewertet in den USA am1. Dezember 2024
The forbidden smoke appeared as soon as I plugged it into my computer
Produktempfehlungen

8.60€

4 .99 4.99€

4.3
Option wählen