Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDagmar Bluhm
Bewertet in Deutschland am 5. Januar 2025
Wollte meine DJI Drohne nach Jahren mal wieder steigen lassen und die Akkus der Drohne laden ... Das "super intelligente" Ladegerät von DJI verweigerte das und legte die Akkus still ... Die Akkus hatten ca. 5 Ladezyklen und waren eigentlich neuwertig ...DJI hat in den Akkus ein tolles Selbstentladungsprogramm mit Stilllegung eingebaut ... Meine 18650 Akkus liegen seit Jahren vollgeladen problemlos herum ...Ein wenig im Internet recherchiert und eine Lösung gefunden ... Die Akkus müssen entweder mit einer Andurino Nano Platine oder mit einer CP2112 Platine umprogrammiert werden ...So weit, so gut ... Beide Platinen für um die 4-5 Euro gekauft, wobei die CP2112 Platine erst in 2 Wochen geliefert wird ...Nach Anleitung im Internet alles heruntergeladen, installiert und eingerichtet, danach die Platine an die Akkus angeschlossen und Programmierung durchgeführt ...Alles läuft wieder bestens ... 👍Empfehlung von mir, wenn man das gleiche Problem hat und keine 100+ Euro für einen Akku ausgeben möchte ... Eines weiß ich nun, nie wieder eine Drohne von DJI ...
Mike W.
Bewertet in den USA am31. Januar 2025
This Nano board does what it is supposed to do, no surprises there. The CH340 chip requires a driver install if you are on Windows, but that is expected with clones. Build quality seems fine, and it worked right away with Arduino IDE. The included USB cable is pretty short and not great, but at least they included one. My only real gripe is the Micro USB port instead of USB-C, which just feels outdated at this point. If you need a cheap Nano for a project, this will get the job done.
dumgoat
Bewertet in den USA am7. Oktober 2024
This Arduino Nano V3 from AYWHP works very well. The only downside is it utilizes a Micro USB port, but in some cases, that may be exactly what you need.The package includes a Micro USB cable and header pins that need to be soldered on. The soldering process was quick and easy. The USB cable works but is very short.The pins are all clearly labeled on the board, and it connected via the Arduino IDE version 2.3.3 without any extra steps or issues.Overall, this is a good quality development board, and I haven't run into any problems with it.
Kn
Bewertet in den USA am29. Oktober 2024
I have a few of these nano clones. This one works as well as any of the others at a good value for the money. It is a little trickier to establish communication with the board but everything else works as a nano board should. Overall this is a good value to have a few extras on hand for future projects.
tool_nut
Bewertet in den USA am13. Oktober 2024
This Nano board is well constructed and lends itself to integration into physically small projects.I used this one for controlling photographic lighting in the woods depending on several possible inputs. It worked out as expected. The sketch I wrote worked the 1st time - always a plus!I plan on using others.
Mike Hunt
Bewertet in den USA am1. Dezember 2024
The forbidden smoke appeared as soon as I plugged it into my computer
Produktempfehlungen