Ihr Warenkorb ist leer
Ihr Warenkorb ist leerosbaldo
Bewertet in Mexiko am 20. Oktober 2024
Muy buen producto
Martin Mayorga
Bewertet in Deutschland am 18. Oktober 2024
siehe Titel.Habe 2 der o.g SSD's. Mit beiden funktioniert das Gehäuse NICHT. Diese funktionieren jedoch in einem anderen Adapter. Die SSD's sind also in Ordnung.Mit anderen SSD's funktionieren die Gehäuse wie gewünscht
NukeGeek
Bewertet in Kanada am 26. Juli 2023
Work very well! before complaining make sure that your computer can handle 20gbs on usb-c , im currently using a AM4 X570 motherboard , and the usb-c on it are limited to 10gbs maximum, not using the fully potential of the device , also the speed could be limited with the performance and the quality of the nvme. A nvme with a high write/read speed but without a onboard ram memory chip (like many cheap models ) will get slower faster in heavy transfer of big files. Meanwhile it should not influence loading in games.Also ye it get hot and its normal , the faster the devices and the nvme , the faster it will get hot. The alloy case is helping spreading the heat as it should, quite normal that it get hot.
Tim Bader
Bewertet in Deutschland am 24. August 2023
Die Wärme wird von der SSD an das Gehäuse abgegeben. So soll es sein. Das inkludierte Wärmeleitpad scheint guten Kontakt zum Gehäuse zu haben, was dieses Gehäuse schon mal besser macht als manch andere NVMe Enclosures, die ich gesehen habe. Chip ist ASMedia ASM2364. Lesen/Schreiben circa 2000MBps/2000MBps. Während dem Benchmarken ging die Temperatur meiner SSD auf 48C hinauf, was immer noch gut ist für eine NVMe SSD. SMART Werte der SSD, wie die Temperatur, können ausgelesen werden. Alles gut.
Van Bever Charles
Bewertet in Deutschland am 21. August 2023
funktioniert bei mir nicht richtig. Ich habe es auf meinem Asus TUF-Motherboard installiert, das über einen 10-Gbit/s-Eingang und einen 20-Gbit/s-Eingang verfügt – nichts zu tun, die Übertragungen sind sehr langsam. Ich bin sehr enttäuscht !
Goffi D.
Bewertet in Italien am 2. September 2023
Devo purtroppo constatare la scarsa qualità di questo brand, (sia come componentistica , sia come intuitivita' di montaggio/ installazione)ho acquistato questo case ed anche uno per hdd...Stesso hdd ed ssd, in entrambi quelli di Orico, non vengono riconosciuti, o freezano il sistema fino a che non si rimuove il cavo.Mettendo l'hdd e l'ssd in un altro case, funzionano perfettamente, quindi il problema non è nelle memorie...Quello x hdd , l'ho reso,Questo l'avevo tenuto pensando fosse un problema dell'ssd ed invece poi, a distanza di mesi, quando ho acquistato un ssd nuovo (980 pro, non proprio uno scaccione), nemmeno quello veniva riconosciuto.X me, brand da evitare come la peste da ora in poi...
Thomas S.
Bewertet in Deutschland am 18. Juli 2023
Gutes Material mit guter Verarbeitung und leichter Montage der SSD mit beiliegendem Schraubendreher. Wärme wird gut abgeleitet, im inneren mit beiliegendes Wärmeleitpad und außen über die gefrästen Kühlrippen. Bis auf die sehr kurzen Kabel (USB-C und USB-A), gibt es nichts zu beanstanden.
B-Halz
Bewertet in Deutschland am 16. Juli 2023
Das Gehäuse schaffte bei mir ca. 2017 MB/S lesen und ca. 19025 MB/s schreibend.Beim sequenziellen Schreiben einer 60 GB-Datei, waren aber nur ca. 1,13 Gb/s und beim Lesen ca. 1,84 GB/s möglich.Die Verarbeitung des Gehäuses ist sehr gut, vor allen endlich mal eine Torxschraube, statt den nervigen Kreuzschlitzschrauben.Mit einer WD_Black_850 mit 1 TB, bei 25° Zimmertemperatur, wird die SSD im Leerlauf an einem USB 3,2*2 Anschluss ca. 44°C und das Gehäuse ca. 39°C warm. Bei einem USB 3.0 Anschluss ist das Ganze 4°C kühler.Unter Volllast werden es dann ca. 56°C warm und das Gehäuse ca. 47°C warm (heiß). Das Abkühlen des Gehäuses dauert dann aber ewig.Zum vergleich, bei einem Alugehäuse mit einem 10 Gbit-Anschluss ohne direkten kontakt zwischen SSD und Gehäuse, wurde die SSD ca. 78°C und das Gehäuse ca. 42°C warm.Also ist das Gehäuse im Vergleich wirklich TOP.In der Packung liegt neben dem entsprechenden Torx-Schraubendreher, auch ein Wärmeleitpad sowie 2 Kabel, mit mit je einen Typ A und C Anschluss.
NetAndif
Bewertet in Deutschland am 5. Januar 2022
Einleitung:Es wurde ja bereits in anderen Rezensionen geschrieben dass das Gehäuse sehr warm wird.Das ist ein gutes Zeichen! Denn falls es nicht warm werden würde, wäre kein vernünftiger Kontakt zwischen den Chips und dem Gehäuse, welches ja als Kühlkörper fungiert, vorhanden.Im Gegensatz zu den oft verkauften "Slide-In" Gehäusen, wo die SSD in das Gehäuse hineingeschoben wird, kommt bei diesem Gehäuse hier ein mit Schrauben fixierter Deckel zum Einsatz.Dadurch ist ein vernünftiger Kontakt erst möglich.Spezialfall:In meinem Fall kommt eine Corsair MP600 Core 2 TB zum Einsatz.Bei dieser ist auf der Unterseite nochmal ein Chip. Dann ist es so, dass dieser Chip keine Verbindung mit dem Gehäuse hat. Hier habe ich ein zusätzliches Stück Wärmeleitpad angebracht, damit wird die Wärme zumindest an die Platine abgegeben (siehe Bilder).Wenn ich einen Verbesserungsvorschlag abgeben darf, dann dass der Hersteller mehrere dünnere Lagen Wärmeleitpad mitliefern sollte, so dass man den flexibel ist. Denn verschiedene M.2 SSD sind anscheinend auch unterschiedlich dick.Fazit:Das M.2 Gehäuse ist grundsätzlich ein brauchbares und gut verarbeitetes Produkt.Jedoch bei längerem Betrieb wird die SSD evtl. so heißt dass die Geschwindigkeit automatisch reduziert wird. Wenn das der Fall ist, wird man permanent im reduzierten Modus arbeiten, bis hin zum Abschalten.PS: Womöglich gibt es diese Probleme nur wenn man eine M.2 NVME SSD verwendet. Bei M.2 SATA SSDs ist die Geschwindigkeit deutlich geringer somit wird die SSD dann eher nicht zu warm.PS2: Natürlich wird man die maximale Geschwindigkeit nur über ein USB-C Kabel erhalten. Sobald man ein Adapter-Kabel verwendet, kommt es sehr stark auf das Kabel an ob man noch in den Genuss der vollen USB 3.2 Geschwindigkeit kommt. Die meisten Kabel machen nur USB 3.1
Viktor W.
Bewertet in Schweden am 28. April 2022
Images says it all. Im comparing the same NVME by connecting it to the motherboard (normal speeds), and with this ORICO device which gives terrible performance (yes Im plugging it in to my computer's USB3.2 gen 2x2 = 20 Gbps port).I was not even able to format the brand new NVME SSD using ORICO device, I had to manually open my computer and install the filesystem using it with the motherboard. Then it would atleast sometimes recognize the device from USB 20 Gbps port.Been doing a lot of message ping pong with ORICO on this one, sending them NUMEROUS graphs like this one trying many different things. They finally wanted to update the firmware when we saw it gave acceptable speeds on my other (slower) USB3.2 Gen 2x1 port = 10 Gbps, but again it was half the speed I intended to use when I bought it.Next problem was AMAZON where its impossible to send the firmware using their "anonymous mail service". When trying to send a link to a shared cloud folder AMAZON censor the link. When trying to send a private email adress AMAZON censor the adress. Its freaking impossible to work like this and this set my project back 2 weeks. I will never recommend buying something from AMAZON again after having this issue with support. ORICO team wanted to help, AMAZON made it impossible.Don't get me wrong, the product should work from the first place. And ORICO could also publish the firmware for this device on their website, like they have done with their other products.My issue is not resolved yet, and here I am with a very expensive 2 TB NVME SSD which I paid 250 USD (from my very limited student budget) for and cant use now.If I could put negative stars I would. 1 star is way to much for all my headache.
Nish
Bewertet in den USA am6. März 2021
It's more expensive but it works as expected. On my old gen 3.1 10Gbps port im getting 900-950MB/sI bought it because apparently the controller chip is the same brand as whats in my motherboard LOL figured it would be decent considering that. I tried a ssk drive and that was junk. Get orico 20gbps "medium" : ) : )PS: the plastic clip thing is fine, unless you plan on swapping the nvme drive often, in that case I would just use the bare board not in enclosure.Edit 3/8/2021The included "USB C to A" cable I received was faulty with only 40mbps speed. I had one on hand that worked and restored full speed, I just wanted to add this to the review info. I would still recommend buy this product.Edit 3/19/2021Recommend Getting a different cable: The included one is good for around 900mbps on 20Gbps port. I swapped cable with a usb4 cable by cable matters and just that changes the speed to around 1600mbps sequential. "Cable Matters USB-IF Certified USB4 Cable with 40Gbps Data " 0.8M
Produktempfehlungen