Ihr Warenkorb ist leer
Ihr Warenkorb ist leerPass Durch Abgeschirmtes RJ45 Stecker Crimps Für Cat5e/Cat6 Ethernet Kabel [10 Stück] [Shielded (FTP) 10 Pack]
Lema
Bewertet in Schweden am 22. August 2024
Man ser att trådarna ligger rätt innan man pressar kontakten ett stort plus.
Happy customer
Bewertet in Deutschland am 15. Januar 2023
Making RJ45’s was never easier. All plug’s have been excellent quality and the wiring process is much less error prone than with legacy RJ45’s. Seller responded quickly to my questions. Will definitely buy again.
Sparky07
Bewertet in Deutschland am 18. November 2022
Leider nicht für 100 prozentiges Crimpen geeignet. Die Kabeldurchführunglöcher sindentweder zu klein oder nicht offen. von 8 Versuchen scheiterten 7.
Tellboy
Bewertet in Großbritannien am 16. März 2021
One of the most frustrating things making up cables is getting the 8 wires in the correct sequence and all 8 contacting the pins.The type that just butt up to end are very difficult and need endless patience.Within a couple of attempts I got these in the correct order and crimped OK.The cable retaining clip also worked after crimping which is not always the case.Very good connector and a bargain price.
Philip Bradbury
Bewertet in Großbritannien am 13. Mai 2021
I’ve always found it hit and miss attaching plugs to Ethernet cables. I saw a video of someone using these on YouTube and found them available for quick delivery on Amazon.Using these plugs it is possible to determine that you have got the wires in exactly the right order before crimping the plug and the wires don’t have to be cut to exactly the correct length.I don’t have a crimping tool that automatically trims the excess wire poking out from the front of the plug, but a Stanley knife does a good enough job for the occasional user such as myself.
Marcot
Bewertet in Frankreich am 7. November 2020
Bon produit
DAVID MILLIGAN
Bewertet in Großbritannien am 25. Juni 2020
I often install IP CCTV and fitting an rj45 plug for a camera at the top of a ladder can be hit and miss. I received a pack of the "through" rj45 plugs to try out and immediately made up a patch lead.Simple, easy. No wondering if the pairs crossed on insertion as I was able to insert each individual wire one at a time AND check they were in the right order as I went.Note: Just remove a bit more of the sheath to expose longer wires to make insertion easier. The really nice thing is that after you've got all the wires through in the right order, you pull the whole bundle through which means that the twist is maintained right up to and inside the cavity at the back of the plug.I didn't use any special crimps which crimp and cut, I used my trusty Lindstrom side cutters to cut the exposed ends and got a 100% test when completed.I love them. I won't be using anything else from now on. Anything which makes my life easier gets a thumbs up from me.Kindest regards to all my colleagues.David Milligan MInstSCE
Produktempfehlungen
