Ihr Warenkorb ist leer
Ihr Warenkorb ist leerBei einigen Fahrzeugen mit CANBus-Controller-System können Fehler bei Blinker und auf dem Armaturenbrett auftreten, wenn Sie LED-Lampen installieren. Verwenden Sie die Philips CEA5W-Warnungsunterdrückung, um solche Fehlersignale zu vermeiden.
Francesco
Bewertet in Italien am 12. November 2017
Questa coppia di resistenze Philips si presenta davvero ben fatta. Da installare sono semplicissime, sono praticamente due morsetti che si agganciano al filo della lampadina, e seguendo le istruzioni una volta inserite le lampadine al LED non vi darà più errore il computer di bordo della vostra auto. Le ho utilizzate per eliminare l'errore alle luci di posizione al LED di un'Alfa Brera, ed hanno funzionato (e funzionano tutt'ora dopo mesi) egregiamente. Non do 5 stelle perchè nell'inserirla nel vano del faro un filo si è piegato alla base mostrando la parte metallica, piccolo difetto di un ottimo prodotto, infatti nonostante il filo in parte scoperto funziona ancora.
Fernando
Bewertet in Spanien am 29. Juni 2016
Lo he usado pero no me ha funcionado en mi caso, ya que el sistema que usa mi coche esta siempre funcionando y deberia soldarlo al conector para que funcionara
PINEL David
Bewertet in Frankreich am 18. März 2016
Ce produit ne fonctionne pas avec l'ODB de ma Skoda Fabia II e-Clim de 2012.L'erreur ampoule défectueuse est toujours présente.
Richard Perkins
Bewertet in Großbritannien am 18. August 2016
These cancellers are for your dash warning when you fit LED's. You get x2 per pack (enough for two bulbs). I used these for some side lights and rear number plate bulbs on a MK3 VW Scirocco along with some genuine Phillips bulbs. Without the cancellers, both bulbs failed to work (literally flashed on then stopped) and a dash warning light came one. With the cancellers fitted, the bulbs worked as factory.These are a small matchbox size and the cabling clips onto the existing car wiring with minimal fuss. They come with double sided tape already stuck to the base and are designed to stick out of the way. Been fitted to the car now for six months (sidelights are on constantly acting as a DRL) and they are still working perfect.
W
Bewertet in Großbritannien am 5. März 2015
I use these cancellers, which are effectively two resistors that to be connected in parallel to LED side marker bulbs to cure the “bulb failure” error message on my dashboard. These are needed when I try to convert halogen 5W T10 bulbs into Philips 4000K LED T10 bulbs, as my car has equipped with CANBUS system, which detect the wattage of the bulb uses in order to tell whether the bulb has failed or not.They come with double sided tapes and cable ties for you to fix the resistor heatsinks. I didn’t dare to stick them on to the inner side of the plastic headlamp housing, as they become very hot during usage and I’m not sure if they are hot enough to melt the plastic. So I put them outside of the headlamp housing and hang them free in the air by their own wires.They served the purpose very well, and very reasonably priced.Amazon.co.uk should however improve the item title, as it lacks of keyword “canceller”, and resistors has no colour temperature, so the “6700K” should be removed from the title.
Produktempfehlungen