Das Gerät macht genau was es soll. Heizt bei uns den Flur/Treppenhaus. Steht nicht im weg da es oberhalb einer Tür montiert ist. Schöne Wärmeverteilung.

Very good thank you.

Ich habe endlich ein warmes Bad beim duschen braucht auch nicht lange zum hoch heizen

Buen producto, calienta estupendamente una estancia de 25m2, también decir que la estancia esta muy bien aislada.

Alles pünktlich und passt sehr gut 👍

Den fyller sin funktion mycket bra

Die Medien konnten nicht geladen werden.

Funziona però diciamo che non scalda sufficentemente le metrature che dicono ma una stanza un po' grandina si

Habe mir vor ein paar Wochen bei der schon vorhandenen Terrase einen Wintergarten gebaut und brauchte eine Heizung,dabei fand ich dieses Gerät,hab mir dann die Bewertungen durchgelesen und dabei fiel mir eine negative Bewertung auf,dieser schrieb das Gerät würde noch nicht mal 5 qm Heizen,ich bestellt es trotzdem,ich muss dabei sagen das mein Wintergarten 25 qm hat,ausgepackt und angeschlossen und innerhalb 15 Minuten hatte ich den Raum angenehm warm,er schafft die 45 Grad aber das dauert ungefähr 1,5 Stunden,ich bin mit diesem Gerät super zufrieden und würde es sofort wieder kaufen,und das das Gerät laut sein soll stimmt nicht,man hört es aber es ist nicht störend.

Hab diese Gerät als Alternative eingebaut!Keinerlei Auswirkungen ! Raum wird nicht warm!Gebläse einfach zu schwach und Hitze nicht ausreichend ! 8 qm realistisch aber nicht den Angaben laut Hersteller!

Chaufffe bien

In unserem Bad war es immer kalt, da unsere Heizung ewig brauchte bis diese warm wurde, hatten wir schon verschiedene andere Heizungen getestet, jedoch nichts was wirklich genügend warm gab.Diese Heizung angebracht und in kürzester Zeit war und ist es schön muckelig warm im Badezimmer.

I bought it to warm up my living room (room size is approximately 27 square meters). I decided to buy it because producer claims it is suitable for rooms up to 60 square meters. By my own experience since delivery (3 days) it is good product but does not work as products description says. First of all it does not measure room air temperature but temperature around device itself. If room temperature is 21 degrees and I want to heat up room to 24 degrees then I must to set up temperature to 26 degrees. Difference between actual temperature and devices own measured temperature seems to be approximately 1-2 degrees. Soon as device reaches desired temperature according its own sensor the device switches to fan-only mode. Then it runs approximately 1 minute or less or sometimes 2 minutes in fan mode and then the sensor detects again that temperature is lower than programmed temperature and then it switches again in to low power mode. Heats up about 1-2 minutes (sometimes also less than a minute and the cycle restarts again). I am not convinced how long the device would resist to such frequent switch-on switch off cycles. If the fan mode could be turned off then the measurement would be more precise because during fan-only mode it cools down distributed air and so it starts to think that temperature is not reached. It could have also selectable fan speed. The fan causes also very light vibration to the wall. It can be felt around device approximately to 10-15 cm. I don't like that it runs on fan constantly when switched on without selected temperature. But there are also some positive outcomes I like. It is cost-effective because it does not switch on high power mode when lower temperatures are set. I tried even to select 26 degrees but it switches to second level only for about less than 30 seconds then switches to low power mode and starts to maintain the desired temperature in that mode. I have tried to heat up same room with oil radiator and traditional convector- both of them never reached the desired temperature for this room. By my own opinion this wall fan heater does same job with 1 kw power that traditional heaters are doing with 2 kw power. That means it saves energy and thanks to it also energy bills are smaller. I like also that air flap position can be set at certain air distribution angle. I don't want use swivel because I want the angle be at higher degree because then air will be blown more at higher lever and to longer distance in the room. Just press swing button repeatedly (every second press will stop the swivel at the current angle). I was concerned also about safety about possible excess heat that could affect the wall but it is very safe. In 26 degrees it does not get hot, it becomes a little warm and also around the device wall does not get hot. Hot becomes only air distributed from the air flap opening. In summary it is good device but could be improved because it is available for very reasonable price to the people who can't afford the traditional air-to air split heating systems. In some cases it is only the only solution if the apartment association or condominium does not allow the installation of the split systems.