Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
David
Bewertet in den USA am9. März 2025
This shower screen is a fine piece of metal work, surely laser cut. Such pieces always amaze me because I don't feel the holes at all, but I see them, and they are there. The surfaces feel absolutely smooth, yet there are many little holes in it, under 0.2mm in diameter. It's stiff and will stand up to normal careful handling. The edges don't cut into the fingers. I didn't try very hard to bend it because I didn't want to succeed, but it seems as strong as one could expect.Being 58.5mm, it fits fine in the basket on top of the puck, but it would not fit on the bottom of the basket because of the slight narrowing of the basket toward the bottom.Using it, the result is that the extraction looked the same as usual, lots of crema at the end as usual for this bean. The shower screen is usually filthy and with this, it was very clean, so the puck screen did its job. It's very easy to rinse off the puck screen, saving the chore of cleaning the shower screen after the shot. After removing the portafilter after the shot, I've heard of using a magnet to remove such a puck screen from the used puck, but just pressing down one side of it I was able to lift the other side to get a finger on the edge and take it out.Since this goes on the top of the puck, I would not expect any reduction in oil (mouth feel) in the shot from using this. It works fine.
Yana
Bewertet in den USA am24. März 2025
This is the thinnest espresso puck screen in my collection of tools, and it is my favorite and most used! It has a sleek matt black finish, and works as intended – keeps the brew head clean and is very good at maintaining an even water flow. I love that it’s thin – I don’t need to adjust the amount of coffee reducing to accommodate a thicker screen in the portafilter basket. Definitely recommend!
David D
Bewertet in den USA am11. März 2025
I like the thinness of this screen. I have other screens (.7 mm/.8 mm), but I like this being thinner. And it is noticeably thinner. The .7/.8mm didn't give me issues, but wanted to try this. I prefer the thinner screen. It seems to work as well as the other screens (It's hard to tell if it is better). The thinner thickness seems to help not get the fine grinds in the screen so that is nice as it seems to clean-up better.So, bottom line is that I'm glad I took the chance and tried. Though I didn't need, it does seem to be better if only in clean-up.
D. Vo
Bewertet in den USA am10. März 2025
In my opinion, a puck screen is a must when you are preparing espresso. It helps take up space in your basket in case you underdose, and it may spread the water evenly across your puck, helping with a more even extraction. But even if you don't subscribe to those ideas, a puck screen definitely keeps your shower screen much cleaner than without one. This is MHW's take on the puck screen, and it's a simple affair fitting 58mm portafilters. This one is 0.2mm thick, which is very thin if you are not familiar with it. Another common size is 1.7mm, which is noticeably thicker. There's no issue or problem with a screen this thin, except it does not reduce your headroom that much (if you're looking for that), and it's much much more fragile (easy to bend if you're not careful). The hole spacing seems very even and consistent. There are apparently over 10,000 of them! Overall, it is highly recommended.
A. Lai
Bewertet in den USA am10. März 2025
Nicely constructed espresso puck screen. I'm surprised how incredibly thin it is and the holes are so tiny and perfectly formed. It is as effective as other thick mesh screens I've used and it keeps the main shower screen and group head very clean. It resolves the problem I have with thicker puck screens that prevent me from being able to run the portafilter basket at "full capacity" leading the puck screen to smash into the shower screen - leaving a dent in the puck screen from the shower screen retaining screw.Unfortunately, as nice as this puck screen is, it is NOT attracted to magnets - it is very *slightly* magnetic, but not nearly enough that you can pull the screen away from a spent puck nor can you even pick the screen up from the table by itself or hang it from a magnet on the side of your machine. I was really looking forward to this feature because I'm tired of needing to bang my hand so hard against the protafilter trying to release puck screens. This screen simply does not address this problem at all.
M. Gottschalk
Bewertet in Deutschland am 6. April 2025
Alles wie beschrieben alles gut !!
Produktempfehlungen