Ihr Warenkorb ist leer
Ihr Warenkorb ist leerIlian Nedialkov
Bewertet in Deutschland am 7. Februar 2025
Running 4 NVMe SSDs of 4TB in a ZFS soft raid, in a x16 PCIe slot biforkated in 4x4 mode via the BIOS ( MB: ASRock X570M Pro4 ), and everything is working fine.The only issue I have is the 4 status LEDs at the back of the card - I cannot find any hardware or software way to disable them, but this is very minor annoyance - I just put some black masking tape over them.
Filippo Vogl
Bewertet in Deutschland am 4. August 2024
Lieferung war sehr schnell. Hab alles gleich ausprobiert. Erkannt wird allerdings erst mal nur ein Speicher. Muss mich da noch etwas einarbeiten. Wenn ich mehr weiß, dann schreibe ich das hier. Ansonsten ist alles in Ordnung und funktioniert.
Eezo Shepard
Bewertet in Deutschland am 22. März 2024
Excellent little adapter card. Fully compatible with Gen 4 4TB drives, no silly obstruction near ports as EZDIY-FAB Quad M.2 adapter I was using earlier. Used various drives old 950Pros, Crucial P5s, Intel 660p, Firecuda 530, KC3000, Corsair 600 Pro, Micron 7450 Pro, WD SN850X. 512GB/960GB/1TB/2TB/4TB depending on type. All OK.2 little nitpicks are:1. because it's so compact it has only 4 mounting standoffs at the edges of the radiator. It would be better if it had 6 - 2 in the middle to put equal pressure across the PCB after screwing down the radiator. Because of compact size PCB can bend a bit if you using 4 non-uniform drives (not identical drives) or 1-sided. You can either release radiator screws a tiny bit, or in case of single sided drives put thick thermalpad underneath - not included in the box). Either way works. Overall very nice.2. Get yourself your own thermalpads of some thicker variety. Supplied ones are extremely thin (0.5mm or even less) and they'll rarely make contact between the drive and radiator.
Produktempfehlungen