Ihr Warenkorb ist leer
Ihr Warenkorb ist leerNeueste Version des originalen Rangemaster Türschnäpper-Kits A092046, dieser hat hochwertige Edelstahl-Rollen, passt auch für Falcon, CornuFé und später Aga gebaute Mercury Herde sowie alte Leisure Rangemaster 90 und 110 cm Herde. Bitte beachten Sie, dass es sich hierbei um echte Schnapper handelt und die Gewinde nicht gewickelt sind. Die Original-Schrauben schneiden automatisch das Gewinde. Stellen Sie sicher, dass Sie den richtigen Schraubendreher verwenden, der eine enge Passform auf älteren Herden hat.
J C C M
Bewertet in Großbritannien am 26. Juli 2024
Matched and works perfectly . Holes all lined up etc
amandaG
Bewertet in Großbritannien am 2. Januar 2024
My 15 year old Rangemaster had developed a few interesting quirks, one of them being that the door on the larger oven needed to be lifted up each time to close it, recently it also opened on its own. I had it professionally cleaned a couple of years ago, and the guy replaced the catch and the clip. Decided to try this tomsee if I could solve the issues myself.The part in the oven (as opposed to the parts in the door) just unscrewed easily. Comparing the old and new parts, this one had a much more defined end, so clearly a better grip. Once that was replaced, I noticed it was on an upward angle (as was the old one), so a light tap with a hammer downward has also stopped the need to lift the door when closing it. It now closes and catches as when it was new. Haven't even needed to replace the part in the door, but know this is also relatively easy as there are four screws on the door to remove the glass to clean it, and have done before.Price was significantly cheaper than anywhere else.
angela
Bewertet in Großbritannien am 13. Dezember 2024
Worked very well easy to fit
Dr J
Bewertet in Großbritannien am 9. März 2022
After getting more and more annoyed with the oven door being difficult to close I decided to search online for a replacement. A genuine Rangemaster part for a 110 oven was just what I needed. Great price too. Fairly easy to install but you need a 3mm hex key and a small spanner. Use the hex key to remove the four screws that hold the door cover in place. With the spanner undo the two bolts holding the old catch in place. Place the new catch in place and screw in the two bolts. Note that the holes are not threaded but the bolts are harder material and with a little pressure they will soon grab (hence -1 star for easy to install but i found screwing the top on in first tightly and then the second one was easy to do). Put the door cover back on and you have a perfectly functioning catch. I couldn't be happier! It comes with the grip post but I didn't need it.
Client d'
Bewertet in Frankreich am 27. November 2019
Expedition rapide et article conforme à mes attentes
Produktempfehlungen
272.00€
99 .00 € 99.00€