Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

RS485 CAN HAT für Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero W/Zero WH, Ermöglicht Fernkommunikation über RS485/CAN Funktion, Onboard CAN Controller MCP2515 über SPI Schnittstelle, Transceiver SN65HVD230

Kostenloser Versand ab 25.99€

19.52€

9 .99 9.99€

Auf Lager

Info zu diesem Artikel

  • RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
  • CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
  • RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
  • Reserved control pins, allows to work with other control boards, comes with online development resources and manual (examples in wiringPi/python)


Overview
RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, the RS485 CAN HAT will enables your Pi to communicate with other devices stably in long-distance via RS485/CAN functions, Onboard CAN Controller MCP2515 via SPI Interface, CAN Transceiver SN65HVD230, and 485 Transceiver SP3485.
Features
1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
2. CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
3. RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
5. Reserved control pins, allows to work with other control boards
6. Comes with online development resources and manual (examples in wiringPi/python)
Specifications
Operating voltage: 3.3V
CAN controller: MCP2515
CAN transceiver: SN65HVD230
485 transceiver: SP3485
Dimension: 65mm x 30mm
Mounting hole size: 3.0mm
Development Resources
https://www.waveshare.com/wiki/RS485_CAN_HAT?Amazon
Package Content
RS485 CAN HAT x1
RPi screws pack (2pcs) x1


Peter
Bewertet in Deutschland am 3. März 2024
Das Can Hat funktioniert gut auch mit einem Rasp 4B und es ist auch Hi-Lo nicht falsch beschrieben wie andere in ihren Rezensionen behaupten. Ich nutze es um ein Emus BMS sowie die MPPT250/100 in meinem Victron System auszulesen.
Bruno Viada
Bewertet in Italien am 23. Dezember 2024
Buon prodotto come da descrizione. Unico limite non aver il contatto di 0V in morsettiera per il collegamanto dello schermo del cavo RS485. Per il resto funziona bene.
Customer
Bewertet in Deutschland am 15. Februar 2024
… dann ist es ein echt klasse Teil! Funktioniert problemlos zum Auslesen der Batterie-Zustandsdaten bei einem Seplos-BMS.1Stern Abzug wegen Beschriftungsdreher. Trotzdem 100% Kaufempfehlung.
Gerrit Beine
Bewertet in Deutschland am 13. September 2024
Der CAN-Adapter läuft perfekt und flott.Hinweise:Man kann ihn nicht mit dem Standard-PoE+ Hat zusammen betreiben, das läuft nicht stabil.Es ist auch empfehlenswert RaspberryPi OS zu verwenden und keine andere Distribution.In anderen Distributionen fehlen teilweise die Overlays, die man dann mühsam zusammensuchen muss.
Frank Oskar
Bewertet in Deutschland am 12. April 2024
Entgegen anderer Rezensionen läuft der Hat mit dem Raspberry 4B einwandfrei und auch die Belegung von CAN High und Low ist wie erwarter, alsos nicht vertauscht. Funktioniert also wie erwartet.
eelco S.
Bewertet in den Niederlanden am 18. April 2024
Werkt goed
Henrik
Bewertet in Deutschland am 25. Februar 2023
War auf der Suche nach einem Can Bus Interface für meinen Raspberry PI 3B auf dem Venus OS 2.9 läuft, um einen China Akku zu überwachen. Geht hiermit problemlos! Per Netzwerkkabel zwei Leitungen anschließen und zwei Codezeilen in der Config. Und schon wird der Akku angezeigt. Einziger Nachteil: Mit einem HAT auf dem PI passt das ganze nicht mehr in das Touchscreen-Gehäuse.
Rafael Goncalves
Bewertet in Deutschland am 16. Januar 2023
The board is compact and well-built but I couldn't make it work with the Rpi 4B.
Tom Schmidt
Bewertet in Deutschland am 14. November 2023
Der Hat läuft seit dem ersten Tag problemlos mit einem PI3 und venusOS.Die Installation lief problemlos und das Ding verrichtet ohne zu murren seinen Dienst.Funktioniert super mit einem Pylontech Speicher über CAN bus.
Hawk
Bewertet in Deutschland am 10. Juli 2023
Habe ihn in einer Venus OS auf Raspberry Pi mit einem SEPLOS/Eel BMS im Einsatz und es läuft fehlerfrei in einer Victron ESS Umgebung
Rita
Bewertet in Italien am 30. April 2023
Ottima
Sweden-shopper
Bewertet in Schweden am 9. Oktober 2022
It fit perfectly on my old RPi 2B so I can use it with NibePi on my Nibe F750 heat pump for the house. This enabled AI based control, taking into account hourly electric prices, weather, wind and sunlight, as well as my preferred comfort settings.
Daniel
Bewertet in Schweden am 3. November 2022
Funkar perfekt med rpi4 och nibepi till min nibe f1245.
Produktempfehlungen

102.97€

40 .99 40.99€

4.9
Option wählen

27.99€

14 .99 14.99€

4.7
Option wählen

9.24€

4 .99 4.99€

4.9
Option wählen

41.31€

19 .99 19.99€

4.8
Option wählen