Ihr Warenkorb ist leer
Ihr Warenkorb ist leerJoyeux
Bewertet in Frankreich am 14. Januar 2025
Pour faciliter l'utilisation de mon nettoyeur HP. L'enrouleur est annoncé pour 30 ml de tuyau et est tout juste suffisant pour 20 ml.
Nick Matthews
Bewertet in Großbritannien am 9. Oktober 2024
Works a treat
geert marien
Überprüft in Belgien am 11. Mai 2024
deze word gebruikt om een 6mm slang op te rollen.er kunnen heel wat meters op.ook best handig de blokkeerfunctie zodat de haspel niet afrolt tijdens het rijden
Tucholka Ralf
Bewertet in Deutschland am 19. Oktober 2023
Alles gut
Hirtenfelder Josef
Bewertet in Deutschland am 18. Januar 2022
gerne wieder
gary neal
Bewertet in Großbritannien am 5. Mai 2021
Where to start positives firstly i think :)Great piece of kit, works really well. solid build, smooth wind/unwind action - locking pins works well although i tend to have mine unlocked all the time.Negatives - this isn't against the unit itself as that is spot on - the main problem is getting the necessary connectors/adapters to fit it. The unit uses 3/8" BSP male and female connectors. All my airlines are 1/4" BSP and Euro quick connects - it took me ages to find some and in the end cost me more than the unit itself but very happy with the end result.If you are in the UK, then i got all my connectors and the red hose in the pic from Mend-A-hose - so if you're struggling to find adapters check out your local one.
Pistu
Bewertet in Deutschland am 15. Oktober 2021
The connection point to the inlet hose is a brass 1/2to3/8 male. Why? All of the hose comes a male connevctor so you cannot connect anything to is without an adapter.the outlet hose connector again in a position where if you have a little stiffer hose you cannot work it in the rail from the outside. Most specially with hose have M22 connectionsBut at least you can buy something in the EU in a reasonable price.
Ray Cannon
Bewertet in Großbritannien am 27. Dezember 2020
Nicely made item, bit of messing around with the fittings as I had 3/8 bsp male to 8mm hose adapters, thought I would be able to remove the brass inlet adapter from the steel pipe but the pipe has a 1/2 bsp female thread. Sorted with a reducing bush from the local plumbing store and all good. Air hose seems more content with it's new home as it no longer lurks around on the garage floor just waiting to trip me up.
Produktempfehlungen