Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDominik
Bewertet in Deutschland am 28. Januar 2025
Für mein selbstdesigntes 3D gedrucktes PC Gehäuse musste ein entsprechend kleiner Kühler mit ordentlich Kühlleistung her. Hatte bisher nur gutes über den Kühler gelesen und kann beruhigt sagen: mein Absoluter Lieblingskühler im Low-Profile Format. PS: Ich habe ihn mittlerweile leicht modifiziert mit einem 120mm Fan, aber auch der mitgelieferte 90mm Fan wird seiner Aufgabe sehr gut gerecht.
Hans
Bewertet in Deutschland am 2. Januar 2025
Wird an einem AM4 5600g in einem Mini ITX NAS betrieben. Beim Einbau aufpassen, das man nicht zu fest anzieht, da die Schraube mit Muttern auf der Rückseite an der Backplate befestigt werden.Sonst verbiegen sich das Mainboard, ohne das mehr Anpressdruck für den Kühler erzeugt wird. Es gibt keine Federn, wie bei Kühlern, die auf der CPU Seite verbaut werden. Montiert auf einem Gigabyte A520I Mini ITX Mainboard. Minimaler Abstand zur Spannungsversorgung, wenn da Kühlkörper drauf sind, reicht es nicht.
antonino ingaliso
Bewertet in Italien am 2. Februar 2025
Montati ottimo
RAS
Bewertet in Deutschland am 18. Februar 2025
Sehr guter Kühler passend für meinen Mini ITX Server. Die Kühlleistung übertrifft den boxed Lüfter bei weitem. Meine i5 CPU ist selbst bei anspruchsvollen Aufgaben nicht über 60 Grad. Die Optik und Verarbeitung sind top. Der Wechsel der Halterungen war leicht und verständlich vorzunehmen.
Dirk
Bewertet in Deutschland am 18. Februar 2025
Lüfter ist sehr gut . Habe ein A4 Bord mit einem AMD Ryzen 7 5700X3D drauf. . Leiser Lüfter
Flemming B.
Bewertet in Deutschland am 11. März 2025
very cheap.
Benjamin Gabel
Bewertet in Deutschland am 1. Januar 2025
Ideal für Mini itx kühlt extrem gut auf dem kleinen Raum.
Alex
Bewertet in Deutschland am 27. Oktober 2024
Der Low-Profile-Kühler ist kleiner als der AXP120, aber auch weniger effizient. Er passt jedoch perfekt in mein Gehäuse und spart viel Platz. Die Kühlleistung ist für seine Größe in Ordnung, und die Installation war problemlos. Im Betrieb bleibt er leise. Geeignet für Builds mit begrenztem Platz, aber wer maximale Effizienz sucht, könnte bessere Optionen finden. Ist aber dennoch eine valide Option und besser als viele andere Kühler in diesem Preissegment.
WR
Bewertet in den Niederlanden am 19. Februar 2024
The performance of this cooler is great, keeps the 5600G in my system at around 35 degrees Celsius (20 degrees ambient), with the fan spinning around 600RPM on idle. Still need to do some performance testing though.The installation is quite a hassle and the instructions are not super clear. For AM4 it's required to remove the backplate and use the supplied one in the right way. You also need to figure out which screws are for Intel and which for AMD, but after you figured that out from the unclear instructions it's ok. It's annoying that you need to bolt it down from the mobo's backside. So that means removing the cooler or CPU would mean that you need to remove the motherboard from the case. So considering ease of installation, it doesn't fly to high. But in regards to value for performance it seems good.
Technology Nerd
Bewertet in Deutschland am 12. Dezember 2024
I understand this is a cheap cooler, but please... The included bracket you supposed to install onto the back of the motherboard is worse than the stock bracket coming with my ASUS motherboard. It bends very easily. That means when I installed this cooler, and tightened it down precisely according to the manual, the motherboard bended. I really did not apply too much pressure. The screw-ends did not come out from the nuts, so the pressure was lower than it supposed to be actually. The motherboard bended, and the bracket supposed to prevent exactly that.So I decided to just stick to my bundled AM4 cooler which mounts onto the original motherboard bracket. It is way better, and my board is straight.
luca givone
Bewertet in Italien am 14. April 2024
Piccolo dissipatore per cpu intel e amd, piuttosto prestante nonostante le dimensioni esteticamente molto bello, ottimo per chi come me aveva case di dimensioni ridotte, ma non voleva utilizzare dissipatore stock, silenzioso e molto semplice da montare consigliato pienamente
Gianluca Costante
Bewertet in Italien am 30. Oktober 2023
Ottimo dissipatore, dalle performance veramente sorprendenti considerando dimensioni e prezzo. L' ho installato su un Intel i7 9700k e le temperature sono sempre tenute a bada. Inoltre con il case chiuso la rumorosità è veramente contenuta.
Windows 98 SE
Bewertet in Italien am 13. September 2023
Fa un pelo fatica a star dietro ad una cpu overcloccata quando è sotto stress, ma recupera presto. Non fa rumore ed è carino, semplice, a differenza delle istruzioni terribili. In generale molto buono!
Produktempfehlungen