Ihr Warenkorb ist leer
Ihr Warenkorb ist leerWir verpflichten uns, effizientere und sicherere Gartenmanagementwerkzeuge für den Rest der Welt bereitzustellen, um Menschen zu helfen, die Müdigkeit beim Sprühen und Reinigen ihres Gartens zu reduzieren. Artikel: Tool Daily Hochdruckreiniger-Adapter-Set, Schnellverbindungs-Set, M22 15 mm auf M22 15 mm Stecker. Federn: M22 15 mm + 3/8 Zoll Stecker, 3/8 Zoll Schnelltrennung + M22 15 mm männlich. Konvertieren Sie die M22-Gewinde-On-Kupplungen in einen 3/8-Zoll-Schnellverbinder. Auf Universal-Pistole, Schlauch und Pumpenanschluss anwenden. Einfach zu verbinden und zu trennen. Arbeitsdruck beträgt bis zu 5.000 PSI. Tool Daily verkauft 15 mm Armatur, nicht 14 mm. Wenn Ihre Armatur 14 mm beträgt, kann es zu Leckagen kommen. Passend für Sun Joe. Hinweise: Tool Daily verkauft 15 mm Armatur, nicht 14 mm. Wenn Ihre Armatur 14 mm beträgt, kann es zu Leckagen kommen.
MO
Bewertet in Deutschland am 21. Oktober 2024
Passt an meinen Makita Hochdruckreiniger. Schlauch kann schnell abgenommen werden und das nervige verdrehen hat (fast) ein Ende.
Ottimi buona qualità
Bewertet in Italien am 4. Dezember 2023
Sono i migliori connettori rapidi che abbia mai comprato qualità alta nulla da dire
Stephen
Bewertet in Kanada am 30. Mai 2023
Fits great as expected (M22-15mm) and makes for a very easy connect/disconnect of the hose to the pressure washer and the washer gun. I highly recommend!
Mark.
Bewertet in Großbritannien am 14. Februar 2022
Easy to install. Eliminates the struggle to remove once a job is done.5 stars.
Mike Lynch
Bewertet in Australien am 4. Oktober 2020
The internal 15mm Swivel does not fit into a Ryobi pressure washer hose connection....although it should.Also, unlike other quick connect kits, it doesn't snap together in a "quick connect" fashion - you have to pull it down, push in the nozzle in, and then force the ring back up to make the connection work.Disappointing.
tom4416
Bewertet in den USA am21. August 2020
I have an AR Blue 390ss that uses the somewhat strange 22x15 threads versus the more standard 22x14. I recently purchased a pistol grip for use with it which came with the adapter to accept the pressure hose from the AR unit but that required unscrewing the wand and screwing on the pistol grip so I wanted quick connects. These were inexpensive, well made, didn't leak a single drop and I realize that the 3/8 male quick connect side is actually a universal fit and so I can use my devices with my other pressure washer which is a Karcher. I can also quick change during a project (after depressurizing the hose first!) between the wand and the pistol grip.I do have a couple of suggestions to those that are getting leaks with these. Do not use teflon tape, there is no need for these type fittings, they make use of an o-ring to seal. Secondly, and more important, lubricate the fitting before screwing these on. Use a water soluble lubricant (astro glide works great but your buddies will wonder why it's in your tool box but let them use their imaginations) to coat the inside of the brass fitting. This prevents the o-ring from tearing, the number one reason these things leak. It will also make disassembly at some point in the future much, much easier. The water soluble lubricant won't damage anything inside the pump itself but you don't need a lot of it - half the size of a pencil eraser is plenty. It also lets you push the male side far enough into the female side for the threads to bite - very important because it will resist due to the tight fit (this is starting to sound like a cheesy romance novel!).Oh, and if you buy this set by mistake and insert your 22x14 hose into it, it will go together just fine, the external threads will match up just fine but it will leak like a sieve because the o-ring isn't making contact properly. Lots of people have done this, unaware that there is this strange difference in sizes that to the naked eye, look exactly the same.
Produktempfehlungen
7.55€
3 .99 € 3.99€