Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDie Fluke TP175 TwistGuard Prüfsonden messen das Gerät oder Ziel für eine genaue Messung, wie Spannung oder Strom. Durch Flexibilität und Qualität bietet jede Sonde die dringend benötigte Präzision. Die verlängerbare TwistGuard-Spitze erfüllt die höchsten elektrischen Sicherheitsanforderungen, um den Kontakt der Spitze zu reduzieren und gleichzeitig Vielseitigkeit für die meisten Messungen zu bieten.
Carlo
Bewertet in Italien am 14. Juni 2024
Fluke, qualità al massimo...
Waleed Ahmed Khan
Bewertet in Kanada am 11. November 2024
Proper packaging and the probes are original.
Will
Bewertet in Großbritannien am 14. April 2022
Nice quality probe
Dejan
Bewertet in Deutschland am 5. Oktober 2021
The probes are in my opinion too dick and is unstable to handle them. The system with outgoing needle(measure part) is good built. Price too high.
Ein sehr treuer Kunde
Bewertet in Deutschland am 3. Juli 2020
Das Problem bei allen Fluke Messgeräten ist das nur ein minimales Zubehör dabei ist und das man es nicht miteinander kombinieren kann und ich habe viele Fluke Messgeräte so habe ich diese Ausstattung in 6 facher Ausführung für alle meine Fluke Messgeräte erworben in Top Verarbeitung was natürlich auch enorm ins Geld geht !
asm154
Bewertet in den USA am24. Januar 2020
The Fluke test leads with banana plugs on both ends are so much more convenient for switching between alligator clips and test probes than the fixed style leads that you have to pressure fit the clips over. Plus it’s just a better, more reliable connection. These probes also include the retractable insulators. The removable ones are too easy to lose.In this case, the added convenience is worth paying a little extra. This version, the “tp175e” is identical to the tp175 but comes with 4mm adapters for the 2mm probes and costs the same from Amazon.
T. Mccleary
Bewertet in den USA am8. Dezember 2014
First, let's be clear. This is not a set of probes with permanently attached leads. If you want the version with leads permanently attached, you want the TL175. These TP175E are modular probes with a shrouded banana jack on the back end. To use these probes you need to purchase at minimum a set of leads with banana plugs on both ends. An excellent (and highly recommended) example would be the Fluke TL224.These probes are typically superior Fluke quality. The retractable shroud over the probe tips works very smoothly, and is excellent. It looks gimmicky until you handle it, and then you realize just how useful it is for avoiding shorting across adjacent terminals.The probe tips are standard 2mm with a semi-sharp tip and threaded base.For needle sharp tips, the TP88 pin probe adapters fit perfectly onto these probes. The only drawback to the TP88 adapters is that they are only rated for use to 60VDC.The threading at the base of the probe tip allow screwing on accessories such as the (included) 4mm banana plug adapter, or the (not included) shrouded alligator clips AC175. I don't know why you'd *want* to use the AC175 instead of using the far superior modular AC285 alligator clips, but I'm sure there's some application for it.In closing, these probes are part of a modular test lead system. They are unlikely to be purchased alone, without other parts of the system (leads, alligator clips, hook probes, alligator extended probes, gripper probes, etc). Honestly, the best way to purchase these is as part of the modular set, such as the TLK225. You'll save money in the long run.Highly recommended, as part of a modular test lead set!
Produktempfehlungen
