Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

UTG MNT-PMTOWL-A Weaverschiene, schwarz, One Size

Kostenloser Versand ab 25.99€

13.76€

6 .99 6.99€

Auf Lager
  • Adapterschiene 11mm auf Weaver
  • für Luftgewehr und .22
  • neueste Generation
  • einfache Montage
  • passend für 11 mm Schiene


UTG Airgun /.22 Luftgewehr Dovetail auf 11mm Picatinny/Weaver Schienen-Adapter MNT-PMTOWL-A Ist das verbesserte Nachfolgemodel von MNT-PMTOWL Hergestellt aus einer Flugzeug-Aluminium-Legierung mit matt-schwarzen Finish, nicht reflektierend. Der 11mm Low-Profile Airgun /.22 zu Picatinny/Weaver Schienenadapter wird mit einem vertikalen Anschlagstift geliefert. Der Adapter hat eine 3,9' (9,9 cm) lange Top-Schiene mit 9 Montagenuten und einem Mittel-V-Schnitt. Die Installation des Schienenadapters erfolgtdurch die beiden Double-Lock Seitenplatten per Daumenschrauben, enge Toleranzen ergeben eine sehr hohe Wiederholungsgenauigkeit bei der Montage. Eigenschaften: .22/ Airgun Dovetail auf Weaver/Picatinny-Schienen Adapter Hergestellt aus Flugzeug-Aluminium-Legierung mit matt-schwarzen Finish 3,9 Zoll (9,9 cm) lange Top Schiene mit 9 Montagenuten und mittleren V-Schnitt Wird mit einem vertikalen Anschlagstift geliefertFür die Montage von Zielhilfen und Zubehör Spezifikationen: Material: AluminumGewicht: 65,2 grAnzahl: 1Schien Typ: Picatinny/WeaverAnzahl der Schienen: 1Länge: 3.9 Zoll (9,9 cm)Profil: Low Profile 11mm Sattelhöhe Waffen-Replikate oder Teilansichten auf den Bildern dienen ausschließlich der Veranschaulichung und sind nicht im Lieferumfang enthalten. Über UTG und Leapers Inc. Leapers Inc. mit Sitz in Michigan, USA produziert und liefert seit 1991 hochwertige Zubehörprodukte für Schützen, Einsatzkräfte, Jäger und Outdoor-Freunde. Bei der kompromisslosen Einhaltung von selbst gesetzten Standards in der Entwicklung und Produktion der eigenen Produktlinie, legt Leapers den Fokus auf Branchentrends und Kundenfeedback. So werden Gesamtlösungen nach den Anforderungen des Verbrauchers entworfen und ständig weiterentwickelt. Leapers Inc. gehört zu den Besten in der Branche und ist auf die Entwicklung und Produktion hochwertiger Nischenprodukte spezialisiert. Im Jahr 2009 machte Leapers einen wichtigen Schritt und startete mit vollen Engagement die Made-in-USA Produkte


MaSch
Bewertet in Deutschland am 25. Januar 2025
Präzise gefertigt. Mit Werkzeug und Ersatzschrauben.
Joseph Good
Bewertet in Kanada am 15. Juni 2024
I was looking for a rail to mount a red dot and voila, here it is. Works great on the carbine. Was very easy to mount and does the job perfectly. Very happy with it.
katherine
Bewertet in Kanada am 10. Juli 2024
I needed a mount that would allow me to move a short scope rearward on a .22. This mount fits the 11 mm dovetails and gets the scope back far enough to get the eye relief I need. I am only using two of the three mounting bolts and have had no problems. I like this mount.
Morgan
Bewertet in den USA am5. Dezember 2023
If you make sure the recoil stop is not too far down, it sits perfectly flush .If you make sure the side plate is put in it's upper groove correctly...they clamp like a pit bull.The 3 bolts are LONG, with threads all the way through the body...for a huge amount of thread surface area...for one great lockup.The people who designed this Gen 2 version deserve a raise, it is a great mount/rail....the price is just a huge bonus.
Michael J
Bewertet in den USA am21. Dezember 2023
I have purchased many scopes, scope rings, and other mounting hard from UTG, all of which has been excellent. This adapter is no exception. It’s very well made, better than many adapters I’ve seen that cost almost twice as much. The screws are larger and stronger than you’ll find on many similar looking adapters, and the machining is better.
badludwig
Bewertet in Deutschland am 10. Mai 2022
Leicht zu montieren.
Kris Karl
Bewertet in den USA am9. August 2019
I ordered this to mount on 1 of 2 pellet guns. I have 1 that has a FPS of around 900 with little to no recoil. This mounted was able to be placed on the pellet gun and help very sturdy. After mounting the scope to this mount, I decided that I didn't like it being on that pellet gun so I moved it over to my Crosman nitro piston Diamondback. That one shoots 1400 FPS and has recoil. I sighted the scope back in after mounting it on the Crosman and so far it's held up very nicely. It actually helping with the recoil a little bit too. I've noticed that my scope settings aren't changing as they were before the mount (nothing major but having to adjust your eye relief every other shot gets old fast).It's not plastic and made from metal all the way through. It's makes a nice riser to give me a little more extra room for my scope.
Produktempfehlungen