Ich benutze das Zweibein an einer Sabatti ST18 Repetierbüchse in .308 Win. auf dem 100m Stand und bin sehr zufrieden.Das Zweibein macht einen sehr stabilen Eindruck und bietet auch einen sicheren und stabilen Stand!!Für die Montage war noch eine zusätzliche Schiene notwendig die ich auch bei Amazon bestellt habe.Ich habe keinen Vergleich zu anderen hochpreisigeren Bipods, aber für meinen Einsatzzweck ist das Zweiben absolut top und ich würde es jederzeit wieder bestellen!!!

Zweibein entspricht der Beschreibung und meinen Vorstellungen . 👍

Solid construction.Height is a little high for bench shooting.

Dieses Zweibein kann ich leider nicht weiter empfehlen da der Spannverschluss beim Schießen mit dem Kaliber 223 locker wird.Und nach jedem zweiten Schuss muss man wieder fest machen. Alles andere funktioniert einwandfrei aus/einklappen, Arretierung für die Beine hält!!!!

Hochwertig verarbeitetes Zweibein, dass den Vergleich gegenüber einem Harris nicht scheuen braucht. Die Beine klappen sehr sauber und präzise aus und ein. Fast geräuschlos legen sich die Beine gegen den Anschlag. Die Teleskopierung lässt sich in 2 cm Schritten einteilen. Um im Liegendanschlag, durch ein 50 mm ZF auf meiner HK MR 308 zu sehen, muss ich gerade eine Teleskopstufe ausziehen. Optimal. Werkseitig kann das Zweibein direkt an eine Picatiny Schiene angebracht werden. Und zwar mit einer Schnellspann-Einrichtung wie am Fahhradsattel. Es liegt aber auch ein Adapter bei, welcher in das Gewinde der Gewehr-Riemenöse geschraubt wird und dann ein Stück Picatiny Schiene bereit stellt. Sehr praktisch für Jagdgewehre.

I'm VERY pleased with this purchase. I took a long time going through the other models and for me this was the one.It's very sturdy, attaches and removes quickly. It's maybe a little heavier than I like (maybe a good thing) but as I will carry in my pack til neededthis is not a problem. Also adjusts in the range that I prefer. Also bought another base so I can just move to my other hunting riflein a flash. In a word ...Perfect !Just ordered a second one!

Super BiPod, funktioniert super auf meinem ar15 in 223rem. Es rastet beim ausziehen sauber ein und lässt sich schön leicht einstellen,es ist stabilVerarbeitet und man kann sich schön in den Schaft legen ohne das was nachgibt.Würde ich wieder Kaufen, und jederzeit nem überteuertem Harris vorziehen.Daumen hoch auch für den Verkäufer

I'm really happy with this bipod. It feels very sturdy I'm works very well with the adjustable notches. I would recommend and would buy this again

I bought this bi-pod with a budget in mind, even though I was somewhat hesitant about the brand. I was won over by the QD attachment design and the ability to quickly interchange this between rifles... and yes, the price.I am not into competition shoots or tactical games that would require unreasonable strength of my equipment, but I do hunt and use my equipment roughly sometimes. I have seen no reason to believe that this bi-pod is not up to the task. I have used it in the field on two varmint hunts and one trip to the range so far.When I received the bi-pod I was impressed with the quality and simplicity of design, seems sturdy and heavy duty. No noisy spring return or deployment of the telescopic legs, just pull on the feet and the legs extend quietly without pushing buttons or turning knobs. Once extended the legs can be locked by turning the lock-knobs if for some reason that is desired, this can be done between the click notches if desired. During shooting, height adjustments have stayed plenty secure for me so far just using the notches.Shooting from the bi-pod proved to be very stable as expected. The QD feature worked easily with one hand, on and off. The adjustment set screw did need a drop of Loctite but then has stayed set with no problems. (degrease before applying the Loctite)** Update** March 2020 ** It appears that the adjustment screw may be stretching a bit. The clamp has loosened significantly over 3-4 years of use. The Locktite is still holding secure preventing the set screw from turning. The only thing that I can think is that the small machine screw has stretched.The QD feature also negates any weight issue that you may have. I see no reason to have any bi-pod attached to the rifle while walking in most situations. The QD lever makes it too quick and easy to take off / put on when ready to go to a position for use of the bi-pod.Using the adapter on my sporter style rifle allows the use of the sling with or without the bi-pod attached and the bi-pod can be detached or attached without removing the sling. The way that the adapter attaches to the sling stud prevents the hardware from coming loose once the sling swivel is attached, without relying on over tightening screws or knobs. The protective padding prevents any metal from contacting the stock.One negative for this bi-pod is the lack of the ability to cant the rifle to level when on uneven surfaces, you just have to adjust the height of the legs to get level. I can't really complain about this because I knew that it didn't have the canting feature when I ordered. The UTG bi-pod that did have this ability looked too ungainly and cumbersome. To me, the QD feature, mounting adapter, price, heavy-duty design and the ability to pan more than makes-up for this one negative.

This bipod is built like a tank!I've used the high priced bipods previously but wanted to save a few bills on my newest build. This was recommended to me and I am VERY glad that it was. I was skeptical about this bipod considering the low cost but was pleasantly surprised at what I received for my money. This makes my high priced bipods look like toys...this bipod is that beefy.I also LOVE the fact that it is picatinny ready with a QD. No need to purchase additional, expensive adapters to mount it to a picatinny rail. It just mounts directly to your picatinny rail...and does so solidly once adjusted properly. I hate purchasing sling post picatinny adapters (after coughing up for the pricy bipod) AND I hate how the sling post adapters change the geometry of the final build mount...but that's just me.The notched legs with incremental adjustments are outstanding for allowing you to adapt this bipod to whatever terrain you're in. It's great for a quick benchrest setup and even greater when prone on uneven ground. A few seconds of leg adjustment and you're level even on surfaces that you wouldn't consider bipod OR prone friendly.If you're expecting spring loaded retractable legs, this isn't the bipod you're looking for. There's a valid reason for this. If you're setting up your position on a surface that isn't level, you'll love how this bipod allows for multiple height settings - per leg. When you press the button to retract a leg, the leg doesn't snap back. Instead, pressing the button allows each leg to be adjusted with precision to the height that you need to ensure BOTH legs are adjusted such that your sight picture is level.No, I'm not a Leapers/UTG employee. I'm someone who has used high priced bipods with gripes about what I received and had to purchase additional parts to make them usable. I am thrilled to have found a bipod manufacturer who actually provides an out of the box product that kicks ass.