Ihr Warenkorb ist leer
Ihr Warenkorb ist leerInternational products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Craig W Fulem
Bewertet in den USA am4. Juni 2024
Replaced my old worn mouse rotary encoder with one of these. Works great now and has that brand new mouse feel to it when scrolling. I now need to wear in my 20 year old mouse again. Thanks!
Phlnges
Bewertet in den USA am2. November 2023
Encoders don't have very noticeable detents. I've had worse, but this aren't great. Still, they work. Pretty sure they're F-switch type. Wish there was a 12mm, but I needed the 5mm for a Mad Catz RAT 9 for a customer. Works great!
Ryun
Bewertet in den USA am20. Juni 2022
I got these since I wasn't sure the size of my encoder. Turns out its an 8mm. Nonetheless a 9mm worked from this pack. I didn't like the way it felt though and there was a strange audible metallic sound from it when it rotated. I found a supplier for a kailh 8mm encoder and bought those and they're much better.I can't really recommend these. Unless you plan on fixing and reselling mice and just want it to work. Then maybe. They're very cheap, but they'll get you by.
Helloisitme
Bewertet in den USA am12. September 2021
Be sure to request the data sheet for this rotary encoder from the seller to confirm it will work for your particular mouse.I had 2 mice that I wanted to try and replace the broken encoder on. Turns out this replacement only works in one of them because they have different pin outs/circuitry. It also has a slightly larger through hole than many other brands which creates a little bit of play in the scroll wheel when scrolling. On the mouse it fit in, it works perfect though.
Brett
Bewertet in den USA am12. Oktober 2021
EDIT: I originally gave this three stars due to an issue I ran into that turned out to be software-related. Adjusted to a five-star since that issue isn't related to these encoders.I bought this to quickly replace a broken scroll encoder on my Swiftpoint Z, since everywhere I looked that carried Kailh encoders were at least a month to ship. I used one of the 7mm units from this batch.Notes:- The top of the encoders are uncovered, leaving the possibility that debris could get into the mechanism. Probably not an issue if it's housed reasonably well inside a mouse, but if it's somewhat exposed, it could pose an issue.- These have a smooth, sort of "floaty" scrolling feel to them (but not in a bad way). Each notch is distinct, but the force needed to actuate is low. Good for scrolling rapidly, somewhat less for scrolling precisely.
Produktempfehlungen
