Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

VKO Dreieckige Splentringe mit Schutzkappe 12 mm Dreiecksring zur Befestigung von Kameragurt für Kameras mit O Ring Öse - 4 Stück (2 Paar)

Kostenloser Versand ab 25.99€

6.08€

2 .99 2.99€

Auf Lager

1.Größe:12mm


  • MATERIALIEN: Aus 100% Edelstahl ringe und hochwertiger ABS Schutzkappe für Festigkeit und Haltbarkeit. Die Schutzabdeckung verhindert ein Verkratzen der Kamera und schützt die Kamera.
  • SPEZIFIKATION: Die Breite beträgt ca. 12mm, Geeignet für die gängigsten Kameragurt / Schultergurt / Handschlaufe breiten ≤ 12 mm. (Bitte überprüfen Sie vor dem Kauf die Breite des Kameragurts.)
  • SICHER: Der Ring aus Edelstahl ist doppelt gewickelt um eine möglichst hohe Sicherheit zu gewährleisten. Es ist sicher, die Kamera zu tragen. Die Installation ist sehr einfach, Verbinden Sie zuerst den Dreiecksring mit der Kamera, Dann mit einer Schutzkappe abdecken.
  • KOMPATIBILITAT: Kompatibel mit den meisten DSLR SLR und Kompakt Kameras mit O Ring Öse.
  • PAKETINHALT: enthält 4 Stück (2 Paar) schutzkappen und 4 Stück (2 Paar) Dreiecksringe.



Produktinformation

VKO VQR-10II Laschenring mit ABS-Schutzkappe zur Vermeidung von Kratzern durch Metallring. Der benutzerdefinierte Ösenring aus 100 % Edelstahl (nicht die billige Eisenlegierung) hilft Ihnen, die Angelegenheit zu lösen, falls Sie den Kameragurt oder die Handschlaufe nicht direkt mit der Kameraschlaufe verbinden können.

Spezifikation:

Dreiecksring: Passend für die meisten gängigen Riemen ≤ 12 mm in der Breite (der Ring mit Kappe kann beim Testen mindestens 4 kg tragen und er ist immer noch in guter Form). Schutzkappe: Maßgeschneiderte Größe für den Anstoßring von VKO.

Lieferumfang:

4 x Schutzkappen, 4 x Dreieck-Ring. (weiteres Zubehör nicht im Lieferumfang enthalten).

Kameragurt-Ringe

Kompatible Kameras Liste:

Kompatibel mit Fujifilm X100F / X-T20 / X-T10 / X-T4 / X-T3 / X-T2 / X70 / X-Pro2 / X-E2S / X-E3 / X-E2 / X-E1 / X-T1 / X-Pro1 / X30 / XQ2 / XQ1 / X100 / X100 / X10 S/X10 0T kompatibel zu Sony A6100 / A6600 / A6000 / A6300 / A6500 / A5100 / A5000 / RX1R / RXIRII / RX10 kompatibel zu Canon EOS M5 / M6 kompatibel zu Nikon 1 J5 / J4 / J3 / V3 / V3 2 / V1 / COOLPIX A kompatibel zu Leica M9 / M(Typ 262) / 10771 M / 10773 M / Q(Typ 116) / M-D (Typ 262) / D-Lux(Typ 109) / X2 / X Vario(Typ 107) / CL / X-E(Typ 102 ) kompatibel zu Panasonic LUU MIX G7 / GX85 / GX850 / GM5 / FZ2500 / ZS100 / FZ1000 / LX100 / GH5 / GH4 / GX8 kompatibel zu Olympus PEN-F / E-P5 / E-M10 III / E-M10 II / E-PL7 / E-PL8 / E-PL8 6 / E-PL 5 / SH-1 / SH-2 / STYLUS 1s

und andere Kameras mit runder Öse

Kameragurt-Ring

Kameragurtverbinder

Kameragurt-Adapter


( i )大好き
Bewertet in Japan am 16. Juli 2023
多少ミグサイですが保護カバーがあった方がボディーのスレ具合が違う気がして購入しました。
詠み人知らず
Bewertet in Japan am 24. August 2022
早速カメラ用ストラップに装着して使用しています。リングカバー付きなので安心感があります。
Seth SO-CINEMATIC
Bewertet in Großbritannien am 5. Oktober 2021
First thoughts:ProsAlmost identical design to my Nikon loops.Comes with a plastic sleeve to protect the camera body from scratches and your straps from wear.Work well on my smaller cameras that weigh less.ConsNo real advantage for me as the rings/triangles are thinner than the originals on my cameras.If you don’t have any attached to your camera already then these will come in useful especially with smaller, lighter or mirrorless camera bodies.Unfortunately I already had rings on mine and the originals are thicker and stronger than these ones, so I can’t take advantage of these on my larger pro full frame DSLRs (Nikon D850 with full frame lenses).For my smaller cameras they do work well but as mentioned they’re thinner than the ones I got with the cameras.Details and things to note (See pictures):Pack of 4x camera body loops and 4x plastic retaining sleeves to limit contact between the loop and the strap or camera body.Reasonable quality and strong, so you should be good if you have a lighter camera and lens setup.The design is better suited for the camera body loops that are circular eyelets rather than the rectangular rail type.Final thoughts:Unfortunately they aren’t as thick or strong as I would have liked to use on my large DSLR, but they were more than adequate on my smaller camera bodies.They did hold my camera and lens but I didn’t feel confident that they could support it in motion or for longer periods of time, purely because they weren’t the same size or larger than the ones I use daily.The manufacturer claims they’re tested to 4kg (still in good shape) with my camera body and telephoto lens weighing in at approximately 3.2kg so it's a little close for me.I’d recommend picking these up if you’re using a ‘point and shoot’, small bridge camera or mirrorless and they should also be suitable for smaller entry level APS-C (crop frame) cameras. At this low price point they’d make useful spares or an upgrade if you just got standard rings with your camera.
Customer
Bewertet in Großbritannien am 19. Juni 2021
Does exactly what they are supposed to do.
I Like Reviewing Things
Bewertet in Großbritannien am 14. Juli 2021
These have been used on two recently purchased second hand cameras, both of which arrived without connectors. They work perfectly, were easy to fit in place, and hold the cameras safely.
Produktempfehlungen

4.99€

1 .99 1.99€

4.5
Option wählen

19.15€

9 .99 9.99€

4.7
Option wählen

56.99€

26 .99 26.99€

4.9
Option wählen

204.81€

87 .99 87.99€

4.7
Option wählen

13.92€

6 .99 6.99€

4.3
Option wählen