Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Waveshare 2-Channel Isolated CAN Expansion HAT for Raspberry Pi with MCP2515 + SN65HVD230 Dual Chips Solution and Multi Onboard Protection Circuits

Kostenloser Versand ab 25.99€

34.99€

18 .99 18.99€

Auf Lager

Info zu diesem Artikel

  • 2-Channel CAN HAT For Raspberry Pi: 2-Channel Isolated CAN Bus Expansion, Multi Onboard Protection Circuits
  • What Can It Do?:Enable Isolated And Stable CAN Bus Capability For Your Raspberry Pi
  • Designed For Raspberry Pi Series:Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards
  • 2-Channel CAN Capability:MCP2515 CAN Controller + SN65HVD230 CAN Transceiver; Electrical Isolation Circuitry Safe & Stable: SM24CANB TVS Diode, ESD Protection, Transient Peak Voltage Protection
  • Flexible And Handy Jumpers: Easily Select 3.3V / 5V Operating Voltage, Or Enable/Disable 120Ω Terminal Resistor, Via Onboard Jumpers


FEATURES AT A GLANCE

  • Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
  • Integrated power isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal
  • Onboard digital isolator, signal isolation makes the communication more safe, more stable, and better anti-interference
  • Onboard TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
  • Onboard voltage translator, select 3.3V/5V operating voltage by jumper
  • Onboard 120Ω terminal resistor, configured by jumper
  • Breakout SPI control pins, for connecting with host control boards like STM32/Arduino

What's On Board

  1. MCP2515 CAN controller
  2. SN65HVD230 transceiver
  3. SI8642ED digital isolator
  4. RT9193-33 power chip
  5. B0505LS-1W power supply isolation module
  6. SM24CANB TVS diode
  7. Standard Raspberry Pi 40PIN GPIO header
  8. CAN bus screw terminal
  9. MCU control pins
  10. 120Ω terminal resistor switch
  11. 3.3V/5V logic level switch
  12. Power indicator

PACKAGE CONTENT

  1. 2-CH CAN HAT x1
  2. Standoffs pack (2pcs) x1
  3. 2×20PIN female header x1

User Manual
Wiki: www.waveshare.com/wiki/2-CH_CAN_HAT?amazon

marcelino
Bewertet in Kanada am 9. Juni 2024
Good quality electronic parts based of my inspection of this raspberry expansion HAT. The soldered are clean which is nice, and installing this hat still has access to 40 pins of pi, as the pins penetrates through the top which is good to have for some project that requires more pins. Overall, great product and must have for any pi projects.
Jones
Bewertet in Kanada am 8. Juni 2024
The Waveshare 2-Channel Isolated CAN Bus Expansion HAT is a game-changer for Raspberry Pi enthusiasts looking to enhance their projects with robust communication capabilities. Featuring a dual-chip solution with MCP2515 and SN65HVD230, this expansion HAT offers unparalleled performance and reliability, making it an essential accessory for any Pi project requiring CAN bus connectivity.With two channels available, this HAT provides ample flexibility for connecting multiple CAN bus devices simultaneously, opening up a world of possibilities for data acquisition, monitoring, and control. Whether you're building a vehicle telemetry system, industrial automation solution, or smart home network, the Waveshare expansion HAT empowers you to take your projects to new heights.In addition to its performance and reliability, this expansion HAT boasts a host of onboard protection circuits, including TVS diodes and ESD protection, further safeguarding your Raspberry Pi and connected devices against electrical hazards.Setting up the Waveshare 2-Channel Isolated CAN Bus Expansion HAT is a breeze, thanks to its plug-and-play design and compatibility with Raspberry Pi models. Whether you're a novice hobbyist or a seasoned engineer, you'll appreciate the ease with which you can integrate this HAT into your projects.
Cristian Carstea
Bewertet in Deutschland am 15. Juli 2024
All good, thank you!
Alex S
Bewertet in Deutschland am 21. Juni 2023
Wird sofort von der Victron Software erkannt und kann problemlos genutzt werden.
Lutz
Bewertet in Deutschland am 17. August 2023
Nach Softwareinstallation auf VENUS OS funktioniert alles gut (BMS).
Chris B.
Bewertet in den USA am10. November 2023
the waveshare instructions are outdated and I encountered problems installing system and libraries.1. I could not make it work on any 64-bit os; it only works on armhf raspios.2. python3 libraries must be installed in venv.so the hat works but it took a long time and patience to make it work. I used Pi4-b.
gprhellas
Bewertet in Deutschland am 17. Oktober 2022
 
Paul
Bewertet in Großbritannien am 12. August 2020
Great product - works great to spec
Produktempfehlungen

10.44€

5 .99 5.99€

4.9
Option wählen

10.82€

5 .99 5.99€

4.8
Option wählen

6.99€

2 .99 2.99€

5.0
Option wählen