Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Waveshare 7.5inch E-Paper HAT Display Module, 800×480 Resolution, Supports Black/White 2 Colors, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero

Kostenloser Versand ab 25.99€

69.99€

32 .99 32.99€

Auf Lager

Info zu diesem Artikel

  • This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there is a V2 label on the back of the screen, you can directly use the program for V2.
  • This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).



Produktinformation

19,1 cm (7,5 Zoll) E-Papier-Hut.

Übersicht

Dies ist ein E-Ink Display HAT für Raspberry Pi, 7,5 Zoll, 800 × 480 Auflösung, mit integriertem Controller, Kommunikation über SPI-Schnittstelle.

Aufgrund der Vorteile wie ultra-niedrigen Stromverbrauch, großer Betrachtungswinkel, klares Display ohne Strom, ist es eine ideale Wahl für Anwendungen wie Regaletikett, Industrieinstrument, und so weiter.

Eigenschaften:

Keine Hintergrundbeleuchtung, zeigt den letzten Inhalt für eine lange Zeit an, auch wenn er ausgeschaltet ist. Sehr geringer Stromverbrauch, grundsätzlich ist Strom nur zum Auffrischen erforderlich. Standard Raspberry Pi 40-Pin GPIO Verlängerungskopfteil, unterstützt Raspberry Pi Serien-Boards, Jetson NanoSPI Schnittstelle, zum Anschluss mit anderen Controller-Boards wie Raspberry/Arduino/Nucleo, etc. Onboard Spannungsübersetzer, kompatibel mit 3,3 V/5 V MCUsKommt mit Entwicklungsressourcen und Handbuch (Beispiel). es für Raspberry Pi/Jetson Nano/Arduino/STM32)

Spezifikationen:

Betriebsspannung: 3,3 V ~ 5 V. Schnittstelle: SPIOutline-Maße: 170,2 mm × 111,2 mmDisplaygröße: 163,2 mm × 97,92 mmPunktsteigung: 0,205 × 0,204Auflösung: 800 × 480Displayfarbe: Schwarz, WeißGrauskala: 2. Vollständige Aktualisierungszeit: 5sAktualisierungsleistung: 38 mW (Typ. ) Standby-Leistung: < 0,017 mWBetrachtungswinkel: > 170 °.

Revisionsverlauf.

Revision V2 wurde am 2019.11 veröffentlicht, die Auflösung ist auf 800 × 480 aktualisiert, von 640 × 384 von V1. Die Hardware und Schnittstelle von V2 sind kompatibel mit V1, allerdings sollte die zugehörige Software aktualisiert werden.

Schnittstelle:

Symbol. Beschreibung:
VCC 3,3 V ~ 5 V.
GND. Boden
DIN SPI MOSI Pin
CLK SPI SCK Pin
CS SPI-Chip-Auswahl, niedrig aktiv.
Gleichstrom. Daten-/Befehlsauswahl (hoch für Daten, niedrig für Befehl)
RST Externes Zurücksetzen, niedrig aktiv.
Beschäftigt. Busy-Status-Ausgang, niedrig aktiv

Maße:

Maße:

Wiki: waveshare.com/wiki/7,5 Zoll_e-Paper_HAT?amazon


Lachlan
Bewertet in Australien am 4. März 2025
I bought a Waveshare 7.5 inch B&W ePaper display. The screen was dead on arrival, it never worked. I to get it working on three different display drivers. I've now wasted ~ 3hrs of my life learning it was the screen and not me.
Traveller
Bewertet in Kanada am 7. September 2024
The Waveshare 7.5inch E-Paper HAT Display Module is compatible with a lot of boards as a hat and everything else with the SPI interface.Waveshare makes a good range of DIY products and I have found them to be reliable and of good quality.There are repositories of code to use this e-paper display for just about any product. It is probably not for the total beginner, but anyone with patience will get something going.I am really glad to have this display and will put it to good use.
Gimli
Bewertet in Kanada am 14. Oktober 2024
Displays usually consume most of the power of a project, but this e-paper display allows you to have a large display without the power consumption hit. Of course there are trade-offs, as usual (monocrome and slow refresh).The quality is great, the image is really crisp. Looks super professional.
Pedro Papadópolis
Bewertet in Australien am 24. Juli 2023
Well.. a disaster happened while connecting the screen to the Driver HAT, my hand slipped and pulled the flat cable too hard, almost ripping it completely off from the screen connector, it was my fault but keep in mind the screen connector has a very thin adhesive that glues it into place, any mistakes and you'll pretty much throw $99 away.Will make a new review once I either buy a new unit or fix the current one.
addison
Bewertet in Großbritannien am 18. September 2023
The Waveshare 7.5inch E-Paper HAT Display Module is a versatile and capable e-paper display that brings a touch of nostalgia to DIY projects. With its high resolution, compatibility with popular development boards, and support for black/white colors, it's a valuable tool for makers and hobbyists. Whether you're creating an e-reader, a weather station, or a custom information display, this e-paper module can add a unique and functional element to your project. While it's not suitable for every application due to its monochrome limitation and slower refresh rate, it excels in scenarios where low power consumption and clear, static visuals are priorities. I highly recommend the Waveshare 7.5inch E-Paper HAT to DIY enthusiasts looking to explore the world of e-paper displays in their projects.
Produktempfehlungen

16.45€

7 .99 7.99€

4.9
Option wählen

13.96€

5 .99 5.99€

4.9
Option wählen

3.49€

0 .99 0.99€

4.7
Option wählen