Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Waveshare ESP32-C3 Mini Development Board(with Pre-soldered Header), ESP32-C3FN4 Single-Core Processor, 160MHz Running Frequency, 2.4GHz WiFi & BT5, Castellated Module, Suitable for SMD Applications

Kostenloser Versand ab 25.99€

11.99€

5 .99 5.99€

Auf Lager

Info zu diesem Artikel

  • Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency
  • Support 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE). 400KB of SRAM and 384KB ROM, and 4MB of onboard Flash memory
  • 3 x SPI, 1 x I2C, 2 x UART, 1 x I2S, 2 x ADC, etc.Castellated module(with pre-soldered header) and onboard ceramic antenna, allows soldering direct to carrier boards
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Integrated with USB serial port full-speed controller, 15 x GPIO pins allows flexibly configuring pin functions



Produktinformation

details
details
details
details
details
details
Kundenrezensionen
4,1 von 5 Sternen 11
4,1 von 5 Sternen 15
4,2 von 5 Sternen 8
4,3 von 5 Sternen 9
Pinhead without pinheader with pre-soldered header without pinheader without pinheader
VERPACKUNGSINHALT 1 piece 1 piece 2 pieces 3 pieces

Client d'
Bewertet in Frankreich am 1. März 2025
J’ai eu pleins de ESP32 j’ai toujours été déçu mais celui-ci est génial c’est du Plug And Play meme pas besoin de soudure c’est tout juste parfait ! Aucun problème avec le développement via Arduino IDE il est directement reconnu. Très stable, seul bémols c’est le BLE la portée et beaucoup trop faible, mais en même temps c’est normal il la quasi pas d’antenne, sinon extrêmement satisfait merci beaucoup !
Jason
Bewertet in den USA am5. Dezember 2024
I am using this ESP32 for some IOT devices. The big thing with this device is it is single core! If you are doing a lot of parallel processing, this might not be for you. If you understand the limitation of this device it will function great. As far as connecting and flashing, I had no issues with that at all. I got this working in platformIO with no issues. Great dev board!
Techlead
Bewertet in Deutschland am 4. Januar 2024
Das Waveshare ESP32-C3 Mini Development Board beeindruckt mit seiner Leistung und Vielseitigkeit. Der ESP32-C3FN4 Single-Core Prozessor mit einer Taktfrequenz von 160 MHz ermöglicht schnelle und effiziente Verarbeitung. Mit 2,4 GHz WiFi und BT5 bietet es zuverlässige drahtlose Konnektivität. Das vorverlötete Header-Design und die Castellated-Module machen es ideal für SMD-Anwendungen. Ein kompaktes Entwicklungsboard für fortschrittliche Projekte
Lukas
Bewertet in Deutschland am 3. Januar 2024
Winziges ESP32-C3 Board mit Wifi und BT an Board.Die Pinleiste ist bereits vorgelötet.Alle relevanten technischen Daten, sowie Pinout findet man hier in den Produktbildern oder -beschreibung.Preislich im Rahmen, ich habe nichts auszusetzen.
Levin Johan
Bewertet in Schweden am 25. September 2024
While it was possible to flash them both the cards had issues and was not working properly. Not sure if it is a bad batch but it could neither identify as HID nor BLE, the onboard led was not working signaling what was going on so I assume something is broken.
OP
Bewertet in Italien am 17. November 2024
Il più piccolo della famiglia ESP32, Ottimo da utilizzare per installare firmware come Esphome per l'uso con Home Assistant per il controllo domestico. Non consigliabile a chi vuole iniziare nel mondo ESP perché ha meno flessibilità nei collegamenti.
Goddy
Bewertet in Spanien am 17. November 2024
En casa somos unos enamorados de las ESP32. Es increible que por menos de 15 euros tengas un micro controlador tan potente y versátil con WiFi, bluetooth de bajo consumo y tantos accesorios y posibilidades disponibles.Pues aquí tienes todo esto, pero en su versión mini, con un poco menos de potencia y capacidades, pero aún menos tamaño del poco que ya tiene el modelo base.Recomendada
Produktempfehlungen

9.92€

4 .99 4.99€

4.9
Option wählen

31.93€

15 .99 15.99€

4.4
Option wählen