長尾 昌紀
Bewertet in Japan am 7. April 2025
素晴らしい加工精度スピードは1800とか1200とか書いてありますが、SSDに依存GEN4なら3000は余裕で超えます!モンスターアダプターよりもすんなりカメラにも入ります
Sean Downey
Bewertet in Kanada am 8. September 2024
Product came with 2 of the 6 screws installed, and a small empty Zip Lock bag.
werner
Bewertet in Deutschland am 7. November 2024
Funktioniert problemlos
lukemaeda
Bewertet in Japan am 30. Juli 2024
ZITAY タイプBカードケース Panasonic S1H と記載されていたのでそのまま信じて購入してしまいました。SUNEAST 1TB NVMe SSD M.2 2230 PCIe Gen 4×4 最大読込: 5,000MB/s 最大書き:4,500MB/s Steam Deck Microsoft Surface 対応 SE900GEN423-1TこのSSDを組み込みましたが、Panasonic S1H SDカードスロットでした。動作確認も出来ずどうしたものかと一晩考えて思い浮かんだのはLumix S5M2 はUSB Type C で外付けSSDを使用出来るのでCFexpressカードリーダーを繋ぎフォマットと動画書き込み出来るか確認しました(安定性も含めて)。GH7実機CFexpressスロットにての装着(熱暴走)確認以外は全てOKでした。ケース自体は問題無いと思いますしネジで固定も出来ますので良いと思います。但し、記載項目は正確にしてもらいたいと思います。
Customer
Bewertet in Deutschland am 22. Oktober 2024
Was a little skeptical at first but decided to pull the trigger and try it out with my canon r5c. Bought two and got the corsair mp600 mini 1TB (not "core") exactly as zitay recommends for the r5c and it works great. Shot 3 weddings so far on them on Raw 8k 60fps and 30fps with no problem and no buffering issues. Heat dissipates much better than my Angelbird cards because of the full metal construction and good thermal paste.
Florian Prause
Bewertet in Deutschland am 20. Juli 2024
Ich habe Wochen lang nach einer Lösung gesucht um mehr Speicher für meine Kamera zu bekommen.Da mir eine normale cfexpress Karte mit 1tb Speicher viel zu teuer ist habe ich diesen Artikel zusammen mit einer 1tb m2 ssd gekauft und es funktioniert perfekt.Videos in 8k (ca 20minuten) oder 40k Bilder mit einer Speicher Karte sind diesen Preis komplett wert.Verarbeitung ist extrem gut und passgenau für die m2 die separat erworben werden muss.Zusammen Bau war in unter 5 Minuten möglich.Schwer begeistert von dieser Lösung
Vatu
Bewertet in Deutschland am 16. Oktober 2024
Works on Canon R5 great. Using crusial m.2 menory.
Doug Stead
Bewertet in Kanada am 12. Juni 2024
Product arrived and was made to the standard required to use inside My Nikon cameras. Put a 1TB m.2 memory card inside as instructed and it works reliable and at impresdive r/w speeds.
Andy
Bewertet in den USA am9. Juni 2023
I decided to experiment a little with doing a DIY CFExpress card. The Zitay enclosure is a step above any of the other ones I've tried - from early MakerFab enclosures to Sintech enclosures; the first one looks like a science experiment, while the 2nd one was a little snug in my Z9.The Zitay, on the other hand, comes with pre-printed labels (only up to 1TB - c'mon Zitay, make 2TB labels too, please :) ), is precisely machined, has an indentation for the pre-printed labels so the card does not become too thick with the label on it, and teeny tiny little screws that fit perfectly. The kit comes with a screwdriver, thermal paste, and thermal pads.Together with an M.2 2230 NVMe, it's all of 5 minutes to assemble this, put it in your camera, and format it. Once done, it works perfectly.Your performance will vary depending on the SSD used. I have a Nikon Z9, Z8 and Z7. Slower PCIe 3.0 SSDs work beautifully in the Z7, but are unable to cope with the highest demands of the Z8 and Z9 (i.e., 4Kp60 N-RAW N-Log HIGH quality video) due to their too slow write speed.However, a PCIe 4.0 SSD such as the SABRENT Rocket NVMe series - available in sizes ranging from 128Gb to 2TB - works perfectly in all cameras, and allows you to record 4Kp60 N-RAW N-Log HIGH quality video. This, IMO, is a winning combination.Subsequent to my first purchase, I have bought 3 more enclosures, and have 2 x 512Gb cards, 1 x 1TB card and 1 x 2TB card, the latter 2 of which are the SABRENT.If you're a DIYer and understand that the bus architecture of CFExpress is essentially the same as that of an NVMe SSD, you'll know that the circuitry is simply a form factor adapter, and therefore highly reliable.This earns a very highly recommended rating from me.