Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

2 Stück 8x8 Punktmatrix Single Chip MCU Steuerung Grün Licht LED Display Modul für Arduino/MCU/51/AVR/STM32/Raspberry Pi, mit Dupont Kabel

Kostenloser Versand ab 25.99€

6.99€

2 .99 2.99€

Auf Lager

1.Farbe:Blau


  • Modul Betriebsspannung: 5V
  • BCD-Encoder, Abtastschaltung und Antriebsschaltung intern integriert
  • Der Chip belegt nur 3 IO-Ports, die kaskadiert werden können. Integrierter Scan-Schaltkreis im Chip, belegt keine Systemressourcen; Integrierte analoge und digitale Helligkeitsregelung, gleichbleibende Helligkeitsanzeige an jedem Punkt
  • Intern integrierter statischer RAM, alle Daten können während des Updates angesprochen werden, ohne dass alle Anzeigen geändert werden müssen
  • Packungsinhalt: 2 x 8x8 Punktmatrix-LED-Anzeigemodul mit grünem Licht, 1 x 30 cm Dupont-Kabel weiblich-männlich, 10-polig


Specification:
Single module can drive an 8 x 8 dot matrix common cathode
Module Operating voltage: 5V
Module dimensions: 3.2 x 3.2 x 1.3 cm / 1.26 x 1.26 x 0.5" (LxWxH)
Holes with four screws, diameter 3mm
Modules with input and output interfaces, support for cascading multiple modules
Wiring instruction:
On the left block to an input port, an output port on the right
When the control of a single module, simply enter the port received a CPU
When more than 3 modules cascaded output input termination CPU, the input output termination module of the first two modules of the first one, the first two modules of the termination input terminal of the three modules, and so on
Taking 51 single chip microcomputer as an example:
VCC - 5V
GND - GND
DIN - P22
CS - P21
CLK - P20
Package Included:
2 x 8x8 Green Light LED Display Module
1 x 30cm Female-Male Dupont Cables 10 PIN


Erika
Bewertet in Italien am 10. März 2023
Come da descrizione. Il colore risultante è verde come nella foto. Perfettamente impacchettato.
Produktempfehlungen

6.99€

2 .99 2.99€

4.6
Option wählen

13.96€

5 .99 5.99€

4.9
Option wählen